unscrew
screw
screw key
temper screw
thumbscrew
lefty loosey, righty tighty
straightener
feeze
crosshead
screw about
cam out
hub
chuck key
extend
invaginate
screw up
unroll
wall plug
unstrap
flex
lap
Phillips head
strip
wrench
knoblike
screwdriver
tap
screwback
knobby
screwpress
unbunch
untighten
screw top
wharve
screwdriving
thread
screw-top
crankle
turn back
screw wrench
uncinch
tear-off
twist
hair divider
drill bit
unrein
crescent wrench
clamp
deflex
set screw
bender
tear up
Inbus key
zeta key
untie
zeta wrench
Unbrako wrench
Allen key
hex key
Unbrako key
cap screw
Inbus wrench
machine screw
screwman
Allen wrench
brace and bit
chop
screw-type
shoulder bolt
chase
combwise
filler
flathead
helical pile
seam
swig
jack-in-the-box
buck
slue
solve
chamfer
unwrap
trowel machine
tap wrench
worm
rim out
straight
crank
gimlet
knoblike
knobby
tear-off
screw-type
combwise
screw key
temper screw
thumbscrew
straightener
crosshead
hub
chuck key
wall plug
Phillips head
screwdriver
screwback
screwpress
screw top
screwdriving
thread
screw-top
screw wrench
screw
hair divider
drill bit
crescent wrench
set screw
bender
Inbus key
zeta key
zeta wrench
Unbrako wrench
Allen key
hex key
Unbrako key
cap screw
Inbus wrench
machine screw
screwman
Allen wrench
brace and bit
shoulder bolt
filler
flathead
helical pile
jack-in-the-box
trowel machine
tap wrench
worm
gimlet
unscrew
screw
feeze
screw about
cam out
extend
invaginate
screw up
unroll
unstrap
flex
lap
strip
wrench
tap
unbunch
untighten
wharve
thread
crankle
turn back
uncinch
twist
unrein
clamp
deflex
tear up
untie
chop
chase
seam
swig
buck
slue
solve
chamfer
unwrap
rim out
straight
crank
verb
- turn like a screw
- have sexual intercourse with
- cause to penetrate, as with a circular motion
- tighten or fasten by means of screwing motions
- defeat someone through trickery or deceit
noun
- someone who guards prisoners
- a simple machine of the inclined-plane type consisting of a spirally threaded cylindrical rod that engages with a similarly threaded hole
- a propeller with several angled blades that rotates to push against water or air
- a fastener with a tapered threaded shank and a slotted head
- slang for sexual intercourse
noun
- A screw hob.
- A rough protuberance or projecting obstruction.
- A point where many routes meet and traffic is distributed, dispensed, or diverted.
- A goal or mark at which quoits, etc., are thrown.
- A computer networking device connecting several Ethernet ports. See switch.
- The central part, usually cylindrical, of a wheel; the nave.
- A central facility providing a range of related services, such as a medical hub or an educational hub.
- A stake with a nail in it, used to mark a temporary point.
- A hardened, engraved steel punch for impressing a device upon a die, used in coining, etc.
- A block for scotching a wheel.
- An area in a video game from which individual levels are accessed.
- A male weasel; a buck; a dog; a jack.
verb
- To straighten (a limb).
- To reenlist for a further period.
- To increase in quantity by weakening or adulterating additions.
- To value, as lands taken by a writ of extent in satisfaction of a debt; to assign by writ of extent.
- Of a class: to be an extension or subtype of, or to be based on, a prototype or a more abstract class.
- To increase in extent.
- To cause to increase in extent.
- To cause to last for a longer period of time.
- To possess a certain extent; to cover an amount of space.
- To bestow; to offer; to impart; to apply.
verb
- To fold; to bend and lay over or on something.
- to envelop, enfold
- To enfold; to hold as in one's lap; to cherish.
- to wind around
- To be turned or folded; to lie partly on or over something; to overlap.
- To polish, e.g., a surface, until smooth.
- To cut or polish with a lap, as glass, gems, cutlery, etc.
- To take (liquid) into the mouth with the tongue; to lick up with a quick motion of the tongue.
- To overtake a straggler in a race by completing one more whole lap than the straggler.
- To wash against a surface with a splashing sound; to swash.
- To rest or recline in a lap, or as in a lap.
- to wrap around, enwrap, wrap up
- To place or lay (one thing) so as to overlap another.
noun
- A piece of brass, lead, or other soft metal, used to hold a cutting or polishing powder in cutting glass, gems, etc. or in polishing cutlery, etc. It is usually in the form of a wheel or disk that revolves on a vertical axis.
- The state or condition of being in part extended over or by the side of something else; or the extent of the overlapping.
- The amount by which a slide valve at its half stroke overlaps a port in the seat, being equal to the distance the valve must move from its mid stroke position in order to begin to open the port. Used alone, lap refers to outside lap (see below).
- The loose part of a coat; the lower part of a garment that plays loosely; a skirt; an apron.
- The traversal of one length of the pool, or (less commonly) one length and back again.
- In card playing and other games, the points won in excess of the number necessary to complete a game;—so called when they are counted in the score of the following game.
- One circuit around a race track.
- An edge; a border; a hem, as of cloth.
- A component that overlaps or covers any portion of itself or of an adjacent component.
- That part of any substance or fixture which extends over, or lies upon, or by the side of, a part of another.
- The taking of liquid into the mouth with the tongue.
- A sheet, layer, or bat, of cotton fiber prepared for the carding machine.
- The act or process of lapping.
- The part of the clothing that lies on the knees or thighs when one sits down; that part of the person thus covered.
- a place of rearing and fostering
- The upper legs of a seated person.
verb
- To remove (the thread or teeth) from a screw, nut, or gear, especially inadvertently by overtightening.
- To perform a striptease.
- To remove all cards of a particular suit from another player. (See also strip-squeeze.)
- To press out the ripe roe or milt from fishes, for artificial fecundation.
- To fire (a bullet or ball) from a rifle such that it fails to pick up a spin from the rifling.
- To empty (tubing) by applying pressure to the outside of (the tubing) and moving that pressure along (the tubing).
- To run a television series at the same time daily (or at least on Mondays to Fridays), so that it appears as a strip straight across the weekly schedule.
- To pare off the surface of (land) in strips.
- To remove the insulation from a wire/cable.
- To pick the cured leaves from the stalks of (tobacco) and tie them into "hands".
- To remove the metal coating from (a plated article), as by acids or electrolytic action.
- To remove the midrib from (tobacco leaves).
- To remove color from hair, cloth, etc. to prepare it to receive new color.
- To remove cargo from (a container).
- To remove fibre, flock, or lint from; said of the teeth of a card when it becomes partly clogged.
- To remove the overlying earth from (a deposit).
- To remove or take away, often in strips or stripes.
- To fail to pick up a spin from the grooves in a rifle barrel.
- To take off clothing.
- To fail in the thread; to lose the thread, as a bolt, screw, or nut.
- To take away something from (someone or something); to plunder; to divest.
- To milk a cow, especially by stroking and compressing the teats to draw out the last of the milk.
noun
- The act of removing one's clothes; a striptease.
- The issuing of a projectile from a rifled gun without acquiring the spiral motion.
- Denotes a version of a game in which losing players must progressively remove their clothes.
- The playing area, roughly 14 meters by 2 meters.
- A strip steak.
- The uniform of a football team, or the same worn by supporters.
- A trough for washing ore.
- An investment strategy involving simultaneous trade with one call and two put options on the same security at the same strike price, similar to but more bearish than a straddle.
- A landing strip.
- A long, thin piece of any material; any such material collectively.
- A long, thin piece of land; any long, thin area.
- A comic strip.
- A street with multiple shopping or entertainment possibilities.
- A television series aired at the same time daily (or at least on Mondays to Fridays), so that it appears as a strip straight across the weekly schedule.
verb
- To use a wrench; to twist with a wrench.
- To rack with pain; to be hurt or distressed.
- To deprive by means of a violent pull or twist.
- To pull or twist violently.
- To injure (a joint) by pulling or twisting.
- To distort the original meaning of; to misrepresent.
noun
- In screw theory, a screw assembled from force and torque vectors arising from application of Newton's laws to a rigid body.
- A movement that twists or pulls violently; a tug.
- An injury caused by a violent twisting or pulling of a limb; strain, sprain.
- A distorting change from the original meaning.
- In coursing, the act of bringing the hare round at less than a right angle, worth half a point in the recognised code of points for judging.
- A hand tool for making rotational adjustments, such as fitting nuts and bolts, or fitting pipes; a spanner.
- An adjustable spanner used by plumbers.
- A violent emotional change caused by separation.
verb
- To cut an internal screw thread.
- To operate an electronic device (e.g. a mobile phone) by tapping a specific place on its (capacitive or other) touch screen.
- To draw off liquid from a vessel.
- To drain off fluid by paracentesis.
- To have sexual intercourse with.
- To put a new sole or heel on.
- To place a listening or recording device on a telephone or wired connection.
- To designate for some duty or for membership, as in 'a tap on the shoulder'.
- To touch one's finger, foot, or other body parts on a surface (usually) repeatedly.
- To deplete, especially of a liquid via a tap; to tap out.
- To furnish with taps.
- To exploit.
- To cadge, borrow or beg.
- To turn or flip a card or playing piece to remind players that it has already been used that turn (by analogy to "tapping," in the sense of drawing on to the point of temporary exhaustion, the resources or abilities represented by the card).
- To submit to an opponent by tapping one's hand repeatedly.
- To strike lightly.
- To advance someone for a post or job, or for membership of a club.
- To make a sharp noise.
- To intercept a communication without authority.
- To force (an opponent) to submit.
noun
- A device used to dispense liquids.
- A device used to listen in secretly on telephone calls.
- A consonant sound made by a single muscle contraction, such as the sound [ɾ] in the standard American English pronunciation of body.
- An interception of communication by authority.
- A tapering cylindrical pin or peg used to stop the vent in a cask.
- A device used to cut an internal screw thread. (External screw threads are cut with a die.)
- The situation where a borrowing government authority issues bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions.
- A gentle or slight blow; a light rap; a pat.
- A piece of leather fastened upon the bottom of a boot or shoe in repairing or renewing the sole or heel.
- A place where liquor is drawn for drinking.
- A signal, by drum or trumpet, for extinguishing all lights in soldiers' quarters and retiring to bed; usually given about a quarter of an hour after tattoo.
- Liquor drawn through a tap; hence, a certain kind or quality of liquor.
- A procedure that removes fluid from a body cavity.
- An Indian malarial fever.
- The act of touching a touch screen.
- A connection made to an electrical or fluid conductor without breaking it.
noun
- A tightening screw on the back of a hand tool.
- A type of case for a pocket watch where the mechanism is accessed by a removable back plate that screws onto the back of the case. Also, a watch that has such a case.
- A powerful shot that imparts a spin to the ball.
- A type of propeller in which the blades are angled to produce a motion similar to threading a screw. Also, the angle of the blades on such a propeller.
- The period of screw rotation during injection molding when the plastic can flow into the mold.
- A masonry abutment on an arch that is wedge-shaped in order to transmit the thrust downward.
- An industrial digging machine that uses a large screw at the back to drill into the ground.
- A hook-shapped attachment for an earring that sits behind the earlobe and tightens with a screw. Also, an earring that uses this type of attachment.
- The effect of putting backspin on the cue ball.
- A mechanism for attaching a small item to clothing that operates by a post which goes through the cloth and a small backing plate that screws to the post. Also, the medal, tie pin, button, etc. that uses this type of attachment.
- A half-volley executed by holding the racket loosely and swinging it straight at the ball.
verb
- To screw on; to fit the threads of a nut on a bolt.
- To put thread through.
- To remove the hair using a thread.
- To pass (through a narrow constriction or around a series of obstacles).
noun
- A screw thread.
- A sequence of connections.
- A filament, as of a flower, or of any fibrous substance, as of bark.
- A long, thin and flexible form of material, generally with a round cross-section, used in sewing, weaving or in the construction of string.
- A unit of execution, lighter in weight than a process, usually sharing memory and other resources with other threads executing concurrently.
- The line midway between the banks of a stream.
- A continued theme or idea.
- A series of messages, generally grouped by subject, in which all messages except the first are replies to previous messages in the thread.
- Composition; quality; fineness.
adj
noun
verb
- To turn a knob etc.
- To injure (a body part) by bending it in the wrong direction.
- To turn the ends of something, usually thread, rope etc., in opposite directions, often using force.
- To wreathe; to wind; to encircle; to unite by intertexture of parts.
- To distort or change the truth or meaning of words when repeating.
- In the game of blackjack (pontoon or twenty-one), to be dealt another card.
- To join together by twining one part around another.
- To wind into; to insinuate.
- To form a twist (in any of the above noun meanings).
- To wind; to follow a bendy or wavy course; to have many bends.
- To cause to rotate.
- To contort; to writhe; to complicate; to crook spirally; to convolve.
- To coax.
- To dance the twist (a type of dance characterised by twisting one's hips).
noun
- A sliver of lemon peel added to a cocktail, etc.
- A distortion to the meaning of a word or passage.
- A sudden bend (or short series of bends) in a road, path, etc.
- A twisting force.
- The form given in twisting.
- An unexpected turn in a story, tale, etc.
- A roll or baton of baked dough or pastry in a twisted shape.
- The spiral course of the rifling of a gun barrel or a cannon.
- A type of dance characterised by rotating one’s hips. See Twist (dance) on Wikipedia for more details.
- A strong individual tendency or bent; inclination.
- The degree of stress or strain when twisted.
- Anything twisted, or the act of twisting.
- A small roll of tobacco.
- A sprain, especially to the ankle.
- A girl, a woman.
- A material for gun barrels, consisting of iron and steel twisted and welded together.
- A type of thread made from two filaments twisted together.
- A rotation of the body when diving.
verb
- To immobilise (a vehicle) by means of a wheel clamp.
- To fasten in place or together with (or as if with) a clamp.
- To hold or grip tightly.
- To modify (a numeric value) so it lies within a specific range by replacing values outside the range with the closest value within the range.
noun
- An electronic circuit that fixes either the positive or the negative peak excursions of a signal to a defined value by shifting its DC value.
- A parking enforcement device used to immobilise a car until it can be towed or a fine is paid; a wheel clamp.
- An instrument used to temporarily shut off blood vessels, etc.
- A mass of bricks heaped up to be burned; or of ore for roasting, or of coal coking.
- A pile of agricultural produce such as root vegetables or silage stored under a layer of earth or an airtight sheet.
- A piece of wood (batten) across the grain of a board end to keep it flat, as in a breadboard.
- A brace, band, or clasp for strengthening or holding things together.
noun
- Any screw used to hold or adjust a setting: frequently a set screw (sense 1), but may also be any other machine screw or thumb screw used for the purpose of setting.
- A screw with threads along the entire length and no head. Typically, set screws have a hex or slot drive recessed in the threaded length; a grub screw or worm screw.
- A screw with a head, usually hexagonal, like a bolt but without a shank to allow it to screw into material rather than take a nut; a tap bolt.
verb
- To wrench out of the ground.
- To succeed dramatically in (an area of endeavor) or against.
- To damage.
- To have intense penetrative sex with.
- To brutally assault.
- To cancel or annul, or to cause the cancellation or annulment of (e.g. an agreement or contract).
- To tear into pieces.
- To start shedding tears.
verb
- To loosen, as something interlaced or knotted; to disengage the parts of.
- In the Perl programming language, to undo the process of tying, so that a variable uses default instead of custom functionality.
- To resolve; to unfold; to clear.
- To become untied or loosed.
- To free from fastening or from restraint; to let loose; to unbind.
verb
- To sever with an axe or similar implement.
- To make a quick, heavy stroke or a series of strokes, with or as with an ax.
- To hit the ball downward so that it takes a high bounce.
- To vary or shift suddenly.
- To remove the final character from (a text string).
- To interrupt; with in or out.
- to give a downward cutting blow or movement, typically with the side of the hand.
- To stab.
- To cut into pieces with short, vigorous cutting motions.
- To converse, discuss, or speak with another.
- To stamp or seal (a document); to mark, impress or otherwise place a design or symbol on paper or other material, usually, but not necessarily, to indicate authenticity.
- To divide the pot (or tournament prize) between two or more players.
- To do something suddenly with an unexpected motion; to catch or attempt to seize.
- To seal a license or passport.
- To chap or crack.
noun
- A movable jaw or cheek, as of a vice.
- A complete shipment.
- A license or passport that has been sealed.
- The device used for stamping or sealing, which also contains the design to be imprinted.
- A blow with an axe, cleaver, or similar utensil.
- A hand where two or more players have an equal-valued hand, resulting in the chips being shared equally between them.
- A stamp or seal; a mark, imprint or impression on a document (or other object or material) made by stamping or sealing a design with ink or wax, respectively, or by other methods.
- Ocean waves, generally caused by wind, distinguished from swell by being smaller and not lasting as long.
- A woodchopping competition.
- A cut of meat, often containing a section of a rib.
- Termination, especially from employment; the sack.
- A blow delivered with the hand rigid and outstretched.
- A mark indicating nature, quality, or brand.
- A turn of fortune; change; a vicissitude.
- A jaw of an animal.
- An IRC channel operator.
- The land at each side of the mouth of a river, harbour, or channel.
verb
- To cut (the thread of a screw).
- To consume another beverage immediately after drinking hard liquor, typically something better tasting or less harsh such as soda or beer; to use a drink as a chaser.
- To follow at speed.
- To seek to attain.
- To hunt.
- To attempt to win by scoring the required number of runs in the final innings.
- To produce enough offense to cause the pitcher to be removed.
- To decorate (metal) by engraving or embossing.
- To pursue a vessel in order to destroy, capture or interrogate her.
- To seek the company of (a member of the opposite sex) in an obvious way.
- To place piping or wiring in a groove encased within a wall or floor, or in a hidden space encased by a wall.
- To groove; indent.
- To swing at a pitch outside of the strike zone, typically an outside pitch.
noun
- A series of brief improvised jazz solos by a number of musicians taking turns.
- One or more riders who are ahead of the peloton and trying to join the race or stage leaders.
- The cavity of a mold.
- A division of the floor of a gallery, marked by a figure or otherwise; the spot where a ball falls, and between which and the dedans the adversary must drive the ball in order to gain a point.
- Anything being chased, especially a vessel in time of war.
- Any of the guns that fire directly ahead or astern; either a bow chase or stern chase.
- The occurrence of a second bounce by the ball in certain areas of the court, giving the server the chance, later in the game, to "play off" the chase from the receiving end and possibly win the point.
- A large country estate where game may be shot or hunted.
- A kind of joint by which an overlap joint is changed to a flush joint by means of a gradually deepening rabbet, as at the ends of clinker-built boats.
- A rectangular steel or iron frame into which pages or columns of type are locked for printing or plate-making.
- A groove cut in an object; a slot: the chase for the quarrel on a crossbow.
- A children's game where one player chases another.
- A trench or channel or other encasement structure for encasing (archaically spelled enchasing) drainpipes or wiring; a hollow space in the wall of a building encasing ventilation ducts, chimney flues, wires, cables or plumbing.
- The part of a gun in front of the trunnions.
- The act of one who chases another; a pursuit.
- A hunt; the act of hunting; the pursuit of game.
noun
verb
- To crack open along a seam.
- Of a bowler, to make the ball move thus.
- To mark with a seam or line; to scar.
- To put together with a seam.
- Of the ball, to move sideways after bouncing on the seam.
- To make the appearance of a seam in, as in knitting a stocking; hence, to knit with a certain stitch, like that in such knitting.
noun
- The stitched equatorial seam of a cricket ball; the sideways movement of a ball when it bounces on the seam.
- A line of junction; a joint.
- A thin stratum, especially of an economically viable material such as coal or mineral.
- An old English measure of grain, containing eight bushels.
- A suture.
- A line or depression left by a cut or wound; a scar; a cicatrix.
- A folded-back and stitched piece of fabric; especially, the stitching that joins two or more pieces of fabric.
- A joint formed by mating two separate sections of materials.
- An old English measure of glass, containing twenty-four weys of five pounds, or 120 pounds.
verb
- To bend; buckle.
- To wash (clothes) in lye or suds, or, in later usage, by beating them on stones in running water.
- To overcome or shed (e.g., an impediment or expectation), in pursuit of a goal; to force a way through despite (an obstacle); to resist or proceed against.
- To move or operate in a sharp, jerking, or uneven manner.
- To copulate, as bucks and does.
- To output a voltage that is lower than the input voltage.
- To resist obstinately; oppose or object strongly.
- To break up or pulverize, as ores.
- To subject to a mode of punishment which consists of tying the wrists together, passing the arms over the bent knees, and putting a stick across the arms and in the angle formed by the knees.
- To press a reinforcing device (bucking bar) against (the force of a rivet) in order to absorb vibration and increase expansion.
- To fuck.
- To throw (a rider or pack) by bucking.
- To saw a felled tree into shorter lengths, as for firewood.
- To swell out.
- To soak, steep or boil in lye or suds, as part of the bleaching process.
- To leap upward arching its back, coming down with head low and forelegs stiff, forcefully kicking its hind legs upward, often in an attempt to dislodge or throw a rider or pack.
noun
- The cloth or clothes soaked or washed.
- A wood or metal frame used by automotive customizers and restorers to assist in the shaping of sheet metal bodywork.
- An uncastrated sheep, a ram.
- A rand (currency unit).
- A frame on which firewood is sawed; a sawhorse; a sawbuck.
- Size.
- A male deer, antelope, sheep, goat, rabbit, hare, and sometimes the male of other animals such as the hamster, ferret and shad.
- A euro.
- Synonym of mule (“type of cocktail with ginger ale etc.”)
- One hundred.
- The body of a post mill, particularly in East Anglia. See Wikipedia:Windmill machinery.
- A leather-covered frame used for gymnastic vaulting.
- The beech tree.
- Lye or suds in which cloth is soaked in the operation of bleaching, or in which clothes are washed.
- One million dollars.
- The body of a cart or waggon, especially the front part.
- Belly, breast, chest.
- A young buck; an adventurous, impetuous, dashing, or high-spirited young man.
- Money.
- A dollar (one hundred cents).
verb
- To loosen or separate the parts of.
- to find out the perpetrator, the motive etc (of crime)
- To algebraically manipulate an equation or inequality into a form that isolates a chosen variable on one side, so that the other side consists of an expression that may be used to generate solutions.
- To find an answer or solution to a problem or question; to work out.
- To find the values of variables that satisfy a system of equations and/or inequalities.
noun
- Anything helical, especially the thread of a screw.
- Either a mythical "dragon" (especially wingless), a gigantic sea serpent, or a creature that resembles a Mongolian death worm.
- A strip of linked tiles sharing parallel edges in a tiling.
- The condensing tube of a still, often curved and wound to save space.
- The spiral wire of a corkscrew.
- A self-replicating program that propagates through a network.
- A short revolving screw whose threads drive, or are driven by, a worm wheel or rack by gearing into its teeth.
- A graphical representation of the total runs scored in an innings.
- More loosely, any of various tubular invertebrates resembling annelids but not closely related to them, such as velvet worms, acorn worms, flatworms, or roundworms.
- A spiral instrument or screw, often like a double corkscrew, used for drawing balls from firearms.
- An internal tormentor; something that gnaws or afflicts one’s mind with remorse.
- The lytta.
- A contemptible or devious being.
- A dance, or dance move, in which the dancer lies on the floor and undulates the body horizontally thereby moving forwards.
- A muscular band in the tongue of some animals, such as dogs; the lytta.
- A generally tubular invertebrate of the annelid phylum; an earthworm.
verb
- To work one's way by artful or devious means.
- To fill in the contlines of (a rope) before parcelling and serving.
- To drag out of, to get information that someone is reluctant or unwilling to give (through artful or devious means or by pleading or asking repeatedly).
- To clean by means of a worm; to draw a wad or cartridge from, as a firearm.
- To cut the worm, or lytta, from under the tongue of (a dog, etc.) for the purpose of checking a disposition to gnaw, and formerly supposed to guard against canine madness.
- To move with one's body dragging the ground.
- To make (one's way) with a crawling motion.
- To effect, remove, drive, draw, or the like, by slow and secret means.
- To work (one's way or oneself) (into) gradually or slowly; to insinuate.
- To deworm (an animal).
verb
noun
- A chiropractor who relies solely on spinal adjustment, with no other treatments.
- Something that is not crooked or bent such as a part of a road or track.
- Five cards in sequence.
- A cigarette, particularly one containing tobacco instead of marijuana.
- A heterosexual.
- A normal person; someone in mainstream society.
adv
- Directly; without pause, delay or detour.
- Continuously; without interruption or pause.
- Of speech or information, without prevarication or holding back; directly; straightforwardly; plainly.
- Of a direction relative to the subject, precisely; as if following a direct line.
adj
- Direct, undeviating.
- Describing the bat as held so as not to incline to either side; on, or near a line running between the two wickets.
- Making no exceptions or deviations in one's support of the organization and candidates of a political party.
- Occurring between people of opposite sex (sometimes, but not always, specifically between heterosexual people).
- Strait; narrow.
- Conventional; mainstream; socially acceptable.
- Thorough; utter; unqualified.
- Of spirits: undiluted, unmixed; neat.
- Concerning the property allowing the parallel transport of vectors along a course that keeps tangent vectors remain as such throughout that course (a course which is straight, a straight curve, is a geodesic).
- Not plus size; thin.
- In proper order; as it should be.
- Heterosexual.
- Serious rather than comedic.
- Containing the names of all the regularly nominated candidates of a single party and no others.
- Related to conventional sexual intercourse.
- Free from dishonesty; honest, law-abiding.
- Not crooked or bent; having a constant direction throughout its length.
- Perfectly horizontal or vertical; not diagonal or oblique.
- In a row, in unbroken sequence; consecutive.
- Not using alcohol, drugs, etc.
- Describing the sets in a match of which the winner did not lose a single set.
- Direct in communication; unevasive, straightforward.
verb
- To turn a crank.
- To turn.
- To cause to spin via other means, as though turned by a crank.
- To turn by means of a crank.
- To act in a cranky manner; to behave unreasonably and irritably, especially through complaining.
- To be running at a high level of output or effort.
adj
- Full of spirit; brisk; lively; sprightly; overconfident; opinionated.
- Liable to capsize because of poorly stowed cargo or insufficient ballast.
- Sick; unwell.
- Strange, weird, odd.
noun
- Synonym of methamphetamine.
- A twist or turn in speech; word play consisting in a change of the form or meaning of a word.
- An amateur in science or other technical subjects who persistently advocates flawed theories
- The penis.
- A twist or turn of the mind; caprice; whim;
- An ill-tempered or nasty person.
- The act of converting power into motion, by turning a crankshaft.
- A bent piece of an axle or shaft, or an attached arm perpendicular, or nearly so, to the end of a shaft or wheel, used to impart a rotation to a wheel or other mechanical device; also used to change circular into reciprocating motion, or reciprocating into circular motion.
- a fit of temper or passion.
English words for 'To loosen a screw or thing by turning it.'
As you may have noticed, above you will find words for "To loosen a screw or thing by turning it.". Hover the mouse over the word you'd like to know more about to view its definition. Click 
to find a better fitting word. Finally, thanks to ChatGPT, the overall results have been greatly improved.
Recent Queries
funky
cataplasm
common sense.
tugboat
homogenized milk
gifted young person who shows much promise
inflammation of the renal pelvis
covariate
A nobody
a teacher.
point by point
a hearty meal.
first half of the year
grains
micromanagement
gradation haircut
zone melting
labour federation
a discovery.
sesame seed
To eat hastily or greedily
starkly
refilling
to deprive of
to procrastinate.
exoplanet
To joke
ugly (of a person)
pert.
steel blue
half a year
outer space
to walk around
to introduce.
One of the simple machines
memorization
a director.
named for the river.
to flash
craftiness
garden
to calm
reprinting
fusion
black
advocacy
for the most part
proclamation
realistic
to cut