toolpost
toolstock
bezel
burr
cutting implement
cutting angle
bill
ripsaw
bodkin
splitsaw
router
billhook
tool post
pair of secateurs
secateurs
E-tool
utility knife
mill
shear
trowel
hack
saw
comb
chisel
sheaf
throw lathe
endocutter
gummer
file
cramp
coping saw
axe
chuck
cutting edge
topper
elastolysis
turning steel
dibble
snips
planer
bow saw
back
throatless shear
pair of scissors
key
slide rest
hand tool
kerf
pipe cutter
buck
chatter
milling cutter
undercut
sawbuck
socket
sawhorse
die
wire cutters
haunching machine
compass saw
hauncher
horse
hoe
carpentry
glut
framesaw
piping
toolhouse
thickness planer
colter
chopper
tool-rest
drag
arcwall machine
bench clamp
sackcloth
arbor
tap
shiver
drill
bonefolder
nibbler
tinsnips
scissors
priser
hacksaw
race knife
grasper
loppers
shovel
caul
rasing-knife
toolie
side tool
cane knife
toolpost
toolstock
bezel
burr
cutting implement
cutting angle
bill
ripsaw
bodkin
splitsaw
router
billhook
tool post
pair of secateurs
secateurs
E-tool
utility knife
mill
shear
trowel
hack
saw
comb
chisel
sheaf
throw lathe
endocutter
gummer
file
cramp
coping saw
axe
chuck
cutting edge
topper
elastolysis
turning steel
snips
planer
bow saw
back
throatless shear
pair of scissors
key
slide rest
hand tool
pipe cutter
buck
chatter
milling cutter
undercut
sawbuck
socket
sawhorse
die
wire cutters
haunching machine
compass saw
hauncher
horse
hoe
carpentry
glut
framesaw
piping
toolhouse
thickness planer
colter
chopper
tool-rest
drag
arcwall machine
bench clamp
sackcloth
arbor
tap
shiver
drill
bonefolder
nibbler
tinsnips
scissors
priser
hacksaw
race knife
grasper
loppers
shovel
caul
rasing-knife
toolie
side tool
cane knife
dibble
kerf
noun
- A small piece of material left on an edge after a cutting operation.
- A uvular "r" sound, or (by extension) an accent characterized by this sound.
- And when his body was against the burr of the spear, he took his sword in both his hands and he swung the sword above his head, and he smote King Arthur with the edge of the sword upon the helmet.
- A thin flat piece of metal, formed from a sheet by punching; a small washer put on the end of a rivet before it is swaged down.
- Many saddles, especially those for use on warhorses, had high burr plates and cantles. this was especially important when knights began using stirrups and the couched lance.
- A rough humming sound.
- 1819, Abraham Rees, The Cyclopaedia
- A metal ring at the top of the hand-rest on a spear.
- 2015, James B. Tschen-Emmons, Artifacts from Medieval Europe, page 280
- A burr knot or burl.
- A sharp, pointy object, such as a sliver or splinter.
- 1724, John Guillim, A Display of Heraldry
- A revolving disk or cone with abrasive surfaces used to grind hard products in a grinder or mill.
- We are made to witness a cathartic shuffling-off of mortalities and of hatreds: Mordred's pulling himself up to the 'burr' of Arthur's spear is Malory's own detail and one of the most memorable in the book.
- A bur; a seed pod with sharp features that stick in fur or clothing.
- A broad iron ring on a tilting lance just below the grip, to prevent the hand from slipping.
- The ear lobe.
- The knot at the bottom of an antler.
- The front of it was defended by an iron-plate, called a vam-plat, that is, an avant-plate, and behind it was a broad iron ring, called a burr.
- burr or ring of iron behind the hand
- 2003, Thomas Howard Crofts, Fifteenth-century Malory, page 290
- 2012, Howard Pyle, The Story of the Grail and the Passing of Arthur
verb
noun
- a cutting tool with a sharp edge
- a statute in draft before it becomes law
- an itemized statement of money owed for goods shipped or services rendered
- a piece of paper money (especially one issued by a central bank)
- the entertainment offered at a public presentation
- an advertisement (usually printed on a page or in a leaflet) intended for wide distribution
- a sign posted in a public place as an advertisement
- a list of particulars (as a playbill or bill of fare)
- a brim that projects to the front to shade the eyes
- horny projecting mouth of a bird
verb
noun
- A small sharp pointed tool for making holes in cloth or leather.
- A blunt needle used for threading ribbon or cord through a hem or casing.
- A dagger.
- A type of long thin arrowhead.
- A sharp tool, like an awl, formerly used for pressing down individual type characters letters from a column or page in making corrections.
- A hairpin.
adv
noun
noun
- A milling cutter.
- A milling machine for machining of solid metal, wood, or plastic.
- An engine.
- An obsolete coin worth one thousandth of a US dollar, or one tenth of a cent.
- One thousandth part, particularly in millage rates of property tax.
- A line of three matching pieces in nine men's morris and related games.
- A manufacturing plant for paper, steel, textiles, etc.
- A prison treadmill.
- A strategy centered on depleting the opponent's deck.
- A machine used for expelling the juice, sap, etc., from vegetable tissues by pressure, or by pressure in combination with a grinding, or cutting process.
- An excavation in rock, transverse to the workings, from which material for filling is obtained.
- A passage underground through which ore is shot.
- Discarding a card from one's deck.
- A boxing match, fistfight.
- An institution awarding educational certificates not officially recognised
- A grinding apparatus for substances such as grains, seeds, etc.
- A building housing such a plant.
- A typewriter used to transcribe messages received.
- A machine for grinding and polishing.
- The building housing such a grinding apparatus.
- The raised or ridged edge or surface made in milling anything, such as a coin or screw.
- A hardened steel roller with a design in relief, used for imprinting a reversed copy of the design in a softer metal, such as copper.
- An establishment that handles a certain type of situation or procedure routinely, or produces large quantities of an item without much regard to quality, such as a divorce mill, a puppy mill, etc.
verb
- To take part in a fistfight; to box.
- To move (a card) from a deck to the discard pile.
- To pass through a fulling mill; to full, as cloth.
- To make (drinking chocolate) frothy, as by churning.
- To move about in an aimless fashion.
- To beat; to pound.
- To grind or otherwise process in a mill or other machine.
- To swim suddenly in a new direction.
- To fill (a winze or interior incline) with broken ore, to be drawn out at the bottom.
- To destroy (a card) due to having a full hand.
- To swim underwater.
- To engrave one or more grooves or a pattern around the edge of (a cylindrical object such as a coin).
- To shape, polish, dress or finish using a machine.
- To undergo hulling.
- To roll (steel, etc.) into bars.
- To cause to mill, or circle around.
noun
- A cutting tool similar to scissors, but often larger.
- A large machine use for cutting sheet metal.
- The act of shearing, or something removed by shearing.
- Wind shear, or an instance thereof.
- A transformation that displaces every point in a direction parallel to some given line by a distance proportional to the point’s distance from the line.
- The response of a rock to deformation usually by compressive stress, resulting in particular textures.
- Forces that push in opposite directions.
verb
- To deform because of forces pushing in opposite directions.
- To make a vertical cut in coal.
- To cut, originally with a sword or other bladed weapon, now usually with shears, or as if using shears.
- To transform by displacing every point in a direction parallel to some given line by a distance proportional to the point’s distance from the line.
- To remove the fleece from a sheep etc. by clipping.
- To cut the hair of (a person).
- To deprive of property; to fleece.
- To reap, as grain.
- To change in direction or speed.
noun
- A tool for chopping.
- A person who frequently canvasses for votes, either directly or by appearing to continuously act with the ulterior motive of furthering their political career.
- An expedient, temporary solution, such as a small patch or change to code, meant to be replaced with a more elegant solution at a later date; a workaround.
- A try, an attempt.
- The foothold traditionally cut into the ice from which the person who throws the rock pushes off for delivery.
- A trick, shortcut, skill, or novelty method to increase productivity, efficiency, or ease.
- A video game or any computer software that has been altered from its original state.
- A hacking blow.
- An improvised device or solution to a problem.
- A hacking; a catch in speaking; a short, broken cough.
- A taxicab (hackney cab) driver.
- A hearse.
- A small ball usually made of woven cotton or suede and filled with rice, sand or some other filler, for use in hackeysack.
- A dry cough.
- A vehicle let for hire; originally, a hackney coach, now typically a taxicab.
- A kick on the shins in football of any type.
- A horse for hire, especially one which is old and tired.
- The act of striking an opponent with one's hockey stick, typically on the leg but occasionally and more seriously on the back, arm, head, etc.
- A board which the falcon's food is placed on; used by extension for the state of partial freedom in which they are kept before being trained.
- A gouge or notch made by such a blow.
- Time check, as for example upon synchronization of wristwatches.
- A computer programmer who makes quick but inelegant changes to computer code to solve problems or add features.
- A computer programmer, particularly a veteran or someone not immediately expected to be capable of programming.
- A swing of the bat at a pitched ball by the batter, particularly a choppy, ungraceful one that misses the ball such as at a fastball.
- One who is professionally successful despite producing mediocre work. (Usually applied to persons in a creative field.)
- A talented writer-for-hire, paid to put others' thoughts into felicitous language.
- An interesting technical achievement, particularly in computer programming.
- A food-rack for cattle.
- Someone who is available for hire; hireling, mercenary.
- An untalented writer.
- A rack used to dry something, such as bricks, fish, or cheese.
- An airplane of poor quality or in poor condition.
- An illegal attempt to gain access to a computer network.
- A grating in a mill race.
- Confinement of an officer to their stateroom as a punishment.
- A person, often a journalist, hired to do routine work.
- A political agitator.
verb
- To ride a horse at a regular pace; to ride on a road (as opposed to riding cross-country etc.).
- To use as a hack; to let out for hire.
- To chop or cut down in a rough manner.
- To kick (a player) on the shins.
- To swing at a pitched ball.
- To use frequently and indiscriminately, so as to render trite and commonplace.
- To cheat by using unauthorized modifications.
- To work with something on an intimately technical level.
- To strike an opponent with one's hockey stick, typically on the leg but occasionally and more seriously on the back, arm, head, etc.
- To hack into; to gain unauthorized access to (a computer system, e.g., a website, or network) by manipulating code.
- To make a flailing attempt to hit the puck with a hockey stick.
- To withstand or put up with a difficult situation.
- To gain unauthorised access to a computer or online account belonging to (a person or organisation).
- To strike in a frantic movement.
- To play hackeysack.
- To lay (bricks) on a rack to dry.
- To drive a hackney cab.
- To apply a trick, shortcut, skill, or novelty method to something to increase productivity, efficiency or ease.
- To keep (young hawks) in a state of partial freedom, before they are trained.
- To cough noisily.
- To make a quick code change to patch a computer program, often one that, while being effective, is inelegant or makes the program harder to maintain.
- To accomplish a difficult programming task.
- To strike lightly as part of tapotement massage.
noun
- A toothed tool used for chasing screws on work in a lathe; a chaser.
- A toothed implement for grooming the hair or (formerly) for keeping it in place.
- A toothed plate used for creating wells in agar gels for electrophoresis.
- A connected and reduced curve with irreducible components consisting of a smooth subcurve (called the handle) and one or more additional irreducible components (called teeth) that each intersect the handle in a single point that is unequal to the unique point of intersection for any of the other teeth.
- A fleshy growth on the top of the head of some birds and reptiles; crest.
- The notched scale of a wire micrometer.
- An old English measure of corn equal to the half quarter.
- The main body of a harmonica containing the air chambers and to which the reed plates are attached.
- A former, commonly cone-shaped, used in hat manufacturing for hardening soft fibre.
- The top part of a gun’s stock.
- The toothed plate at the top and bottom of an escalator that prevents objects getting trapped between the moving stairs and fixed landings.
- A toothed wooden pick used to push the weft thread tightly against the previous pass of thread to create a tight weave.
- The curling crest of a wave; a comber.
- A crest (of metal, leather, etc) on a piece of armor, especially on a helmet.
- A structure of hexagon cells made by bees for storing honey; honeycomb.
- One of a pair of peculiar organs on the base of the abdomen in scorpions, with which they comb substrate.
- The collector of an electrical machine, usually resembling a comb.
- A machine used in separating choice cotton fibers from worsted cloth fibers.
verb
- To search thoroughly as if raking over an area with a comb.
- To groom with a toothed implement, especially a comb.
- To roll over, as the top or crest of a wave; to break with a white foam, as waves.
- To turn a vessel parallel to (the track of) (a torpedo) so as to reduce one's size as a target.
- To separate choice cotton fibers from worsted cloth fibers.
noun
- A cutting tool used to remove parts of stone, wood or metal by pushing or pounding the back when the sharp edge is against the material. It consists of a slim, oblong block of metal with a sharp wedge or bevel formed on one end and sometimes a handle at the other end.
- Gravel.
- Coarse flour; bran; the coarser part of bran or flour.
verb
noun
- A sheave.
- A quantity of arrows, usually twenty-four.
- A bundle of arrows sufficient to fill a quiver, or the allowance of each archer.
- An abstract construct in topology that associates data to the open sets of a topological space, together with well-defined restrictions from larger to smaller open sets, subject to the condition that compatible data on overlapping open sets corresponds, via the restrictions, to a unique datum on the union of the open sets.
- A quantity of the stalks and ears of wheat, rye, or other grain, bound together; a bundle of grain or straw.
- Any collection of things bound together.
verb
noun
- A hand tool consisting of a handle to which a block of coarse metal is attached, and used for removing sharp edges or for cutting, especially through metal.
- A column of people one behind another, whether "single file" or in a grid pattern.
- A collection of papers collated and archived together.
- one of the eight vertical lines of squares on a chessboard (i.e., those identified by a letter).
- A row of modular kitchen units and a countertop, consisting of cabinets and appliances below (dishwasher) and next to (stove/cooker) a countertop.
- The primary item on the menu bar, containing commands such as open, save, print, etc.
- Course of thought; thread of narration.
- A roll or list.
- An aggregation of data on a storage device, identified by a name.
- A small detachment of soldiers.
verb
- To submit a formal request to some office.
- To corrupt.
- To commit (official papers) to some office.
- To store a file (aggregation of data) on a storage medium such as a disc or another computer.
- To place in an archive in a logical place and order.
- To smooth, grind, or cut with a file.
- To move in a file.
- To submit (a story) to a newspaper or similar publication.
noun
- A tool for felling trees or chopping wood etc. consisting of a heavy head flattened to a blade on one side, and a handle attached to it.
- A position, interest, or reason in buying and selling stock, often with ulterior motives.
- An ancient weapon consisting of a head that has one or two blades and a long handle.
- A dismissal or rejection.
- A drastic reduction or cutback.
- A gigging musician's particular instrument, especially a guitar in rock music or a saxophone in jazz.
verb
noun
- A person or tool that cuts off the top of something.
- A top hat.
- A short outer jacket worn by women or children.
- The head or chief of an organization.
- One who tops steel ingots.
- A pencil sharpener.
- Something that is on top.
- A single-handed dinghy, 11 foot (3.6 metres) in length, with only one sail.
- A small secondary comic strip seen along with a larger Sunday strip, and usually by the same author.
- A three-square float, or file, used by comb-makers.
- The student who achieves the highest score in an examination.
- Something that exceeds those previous in a series, as a joke or prank.
- A soft, relatively thin, piece of padding placed on top of a mattress, or forming the upper layer of a mattress.
noun
noun
- A woodworking tool which smooths a surface or makes one surface of a workpiece parallel to the tool's bed.
- A large machine tool in which the workpiece is traversed linearly (by means of a reciprocating bed) beneath a single-point cutting tool. (Analogous to a shaper but larger and with the workpiece moving instead of the tool.) Planers can generate various shapes, but were most especially used to generate large, accurate flat surfaces. The planer is nowadays obsolescent, having been mostly superseded by large milling machines.
noun
- The side of a blade opposite the side used for cutting.
- Effort, usually physical.
- The reverse side; the side that is not normally seen.
- The keel and keelson of a ship.
- A large shallow vat; a cistern, tub, or trough, used by brewers, distillers, dyers, picklers, gluemakers, and others, for mixing or cooling wort, holding water, hot glue, etc.
- The part of something that goes last.
- The spine and associated tissues.
- The backrest, the part of a piece of furniture which receives the human back.
- A ferryboat.
- The roof of a horizontal underground passage.
- Large and attractive buttocks.
- The inside margin of a page.
- The edge of a book which is bound.
- In some team sports, a position behind most players on the team.
- A support or resource in reserve.
- The rear of the body, especially the part between the neck and the end of the spine and opposite the chest and belly.
- A non-alcoholic drink (often water or a soft drink), to go with hard liquor or a cocktail.
- Among leather dealers, one of the thickest and stoutest tanned hides.
- Area behind, such as the backyard of a house.
- The side of any object which is opposite the front or useful side.
- That which is farthest away from the front.
- The part of a piece of clothing which covers the back.
- Upper part of a natural object which is considered to resemble an animal's back.
adj
- Pronounced with the highest part of the body of the tongue toward the back of the mouth, near the soft palate (most often describing a vowel).
- Not current.
- Situated away from the main or most frequented areas.
- At or near the rear.
- Returned or restored to a previous place or condition.
- Moving or operating backward.
- In arrears; overdue.
adv
- In a direction opposite to the usual or desired direction of movement or progress, physically or figuratively.
- So as to reverse direction and return.
- Away from someone or something; at a distance.
- Away from the front or from an edge.
- In a manner that impedes.
- In a reciprocal manner; in return.
- So as shrink, recede or move aside, or cause to do so.
- To a later point in time. See also put back.
- Towards, into or in the past.
- To or in a previous condition or place.
- Earlier, ago.
- In a direction opposite to that in which someone or something is facing or normally pointing.
postp
verb
- To go in the reverse direction.
- To lay out a second, smaller anchor to provide additional holding power.
- To push or force backwards.
- To adjoin behind; to be at the back of.
- To support.
- To stand still behind another dog which has pointed.
- To brace the yards so that the wind presses on the front of the sail, to slow the ship.
- To change direction contrary to the normal pattern; that is, to shift anticlockwise in the northern hemisphere, or clockwise in the southern hemisphere.
- To make a back for; to furnish with a back.
- To write upon the back of, possibly as an endorsement.
- To sign or endorse (a warrant, issued in another county, to apprehend an offender).
- To draw from behind the back [+accusative = a knife etc.] (as also back out).
- To row backward with (oars).
- To carry an infant on one's back.
noun
- A piece of wood used as a wedge.
- The general pitch or tone of a sentence or utterance.
- A piece of information (e.g., a password or passphrase) used to encode or decode a message or messages.
- A modification of an advertisement so as to target a particular group or demographic.
- One of several small, usually square buttons on a typewriter or computer keyboard, mostly corresponding to text characters.
- A scale or group of pitches constituting the basis of a musical composition.
- A series of logically organized groups of discriminating information which aims to allow the user to correctly identify a taxon.
- The degree of roughness, or retention ability of a surface to have applied a liquid such as paint, or glue.
- One of a string of small islands.
- A crucial step or requirement.
- A password restricting access to an IRC channel.
- In instruments with a keyboard such as an organ or piano, one of the levers, or especially the exposed front end of it, which are depressed to cause a particular sound or note to be produced.
- In musical notation, a sign at the head of a staff indicating the musical key.
- A value that uniquely identifies an entry in a container.
- A keystone.
- The last board of a floor when laid down.
- The lowest note of a scale; keynote.
- A wooden support for a rail on the bullhead rail system.
- In musical theory, the total melodic and harmonic relations, which exist between the tones of an ideal scale, major or minor; tonality.
- An indehiscent, one-seeded fruit furnished with a wing, such as the fruit of the ash and maple; a samara.
- In musical instruments, one of the valve levers used to select notes, such as a lever opening a hole on a woodwind.
- A guide to the correct answers of a worksheet or test.
- The thirty-third card of the Lenormand deck.
- A guide explaining the symbols or terminology of a map or chart; a legend.
- That part of the plastering which is forced through between the laths and holds the rest in place.
- In musical theory and notation, the tonality centering in a given tone, or the several tones taken collectively, of a given scale, major or minor.
- A manual electrical switching device primarily used for the transmission of Morse code.
- The black ink layer, especially in relation to the three color layers of cyan, magenta, and yellow. See also CMYK.
- The free-throw lane together with the circle surrounding the free-throw line, the free-throw lane having formerly been narrower, giving the area the shape of a skeleton key hole.
- A color to be masked or made transparent.
- An object designed to open and close a lock.
- In a relational database, a field used as an index into another table (not necessarily unique).
- An object designed to fit between two other objects (such as a shaft and a wheel) in a mechanism and maintain their relative orientation.
verb
- To be identified as a certain taxon when using a key.
- (more usually to key in) To enter (information) by typing on a keyboard or keypad.
- To fasten or secure firmly; to fasten or tighten with keys or wedges.
- To link (as one might do with a key or legend).
- To depress (a telegraph key).
- To prepare for plastering by adding the key (that part of the plastering which is forced through between the laths and holds the rest in place).
- To attune to; to set at; to pitch.
- To vandalize (a car, etc.) by scratching with an implement such as a key.
- To operate (the transmitter switch of a two-way radio).
- To modify (an advertisement) so as to target a particular group or demographic.
- To fit (pieces of a mechanical assembly) with a key to maintain the orientation between them.
- To mark or indicate with a symbol indicating membership in a class.
- To fit (a lock) with a key.
adj
verb
noun
noun
- The situation where a drill or similar tool vibrates and tears the material rather than cutting it cleanly.
- The vocalisations of a Eurasian magpie, Pica pica.
- One who chats.
- The sound of talking.
- The vocalisations of various birds or other animals.
- An intermittent noise, as from vibration.
- In national security, the degree of communication between suspect groups and individuals, used to gauge the degree of expected terrorist activity.
- A user of chat rooms.
- Talk, especially meaningless or unimportant talk.
verb
noun
- a cut made underneath to remove material
- the material removed by a cut made underneath
- the tender meat of the loin muscle on each side of the vertebral column
- a notch cut in the trunk of tree in order to determine the direction of its fall
- (sports) a stroke that puts reverse spin on the ball
verb
- sell cheaper than one's competition
- cut away material from the underside of (an object) so as to leave an overhanging portion in relief
- cut away the underpart of
- strike (the ball) in golf, tennis, or hockey obliquely downward so as to give a backspin or elevation to the shot
- cut obliquely into (a tree) below the main cut and on the side toward which the tree will fall
noun
- A hollow tool for grasping and lifting tools dropped in a well-boring.
- One endpoint of a two-way communication link, used for interprocess communication across a network.
- A hollow into a bone which a part fits, such as an eye, or another bone, in the case of a joint.
- An opening into which a plug or other connecting part is designed to fit (e.g. a light bulb socket).
- One endpoint of a two-way named pipe on Unix and Unix-like systems, used for interprocess communication.
- The hollow of a candlestick.
- A steel apparatus attached to a saddle to protect the thighs and legs.
verb
noun
- a cutting tool that is fitted into a diestock and used for cutting male (external) screw threads on screws or bolts or pipes or rods
- a small cube with 1 to 6 spots on the six faces; used in gambling to generate random numbers
- a device used for shaping metal
verb
- pass from physical life and lose all bodily attributes and functions necessary to sustain life
- suffer or face the pain of death
- be brought to or as if to the point of death by an intense emotion such as embarrassment, amusement, or shame
- stop operating or functioning
- feel indifferent towards
- languish as with love or desire
- cut or shape with a die
- to be on base at the end of an inning, of a player
- lose sparkle or bouquet
- disappear or come to an end
- suffer spiritual death; be damned (in the religious sense)
noun
- a framework for holding wood that is being sawed
- solid-hoofed herbivorous quadruped domesticated since prehistoric times
- a padded gymnastic apparatus on legs
- troops trained to fight on horseback
- a chessman shaped to resemble the head of a horse; can move two squares horizontally and one vertically (or vice versa)
verb
noun
- A piece of wood used to fill up behind cribbing or tubbing.
- That which is swallowed.
- Five goals scored by one player in a game.
- A block used for a fulcrum.
- An excess, too much.
- The broad-nosed eel (Anguilla anguilla, syn. Anguilla latirostris), found in Europe, Asia, the West Indies, etc.
- Something that fills up an opening.
- A bat, or small piece of brick, used to fill out a course.
- A wooden wedge used in splitting blocks.
- An arched opening to the ashpit of a kiln.
verb
noun
- A piece cut off to be set or planted; a cutting.
- An act of making music or noise with pipes.
- A system of pipes that compose a structure; pipework.
- The process of an animal just beginning to break out of its egg; precedes hatching.
- The sound of musical pipes.
- An ornamentation on the edges of a garment; a small cord covered with cloth.
- Icing extruded from a piping bag.
- propagation by cuttings
adj
noun
noun
- A tool for chopping wood; an axe/ax.
- A thick mitten, usually with yellow leather on the outside.
- The penis.
- A knife for chopping food, especially one with a large oblong blade.
- A helicopter.
- An assault rifle, especially a fully-automatic one (e.g. an AK-47).
- A type of road motorcycle, especially as used by biker/bikie gangs.
- A crude tool with an irregular cutting edge formed by removing flakes from one side of a stone.
- A high-bouncing batted ball.
- The bluefish (Pomatomus saltatrix).
- Any of various electronic switches used to interrupt one signal under the control of another.
verb
noun
- A device for guiding wood to the saw.
- A men's party attended in women's clothing.
- A long open horse-drawn carriage with transverse or side seats.
- A heavy harrow for breaking up ground.
- A skid or shoe for retarding the motion of a carriage wheel.
- The bottom part of a sand casting mold.
- A double drum-stroke played at twice the speed of the context in which it is placed.
- Someone or something that is annoying or frustrating, or disappointing; an obstacle to progress or enjoyment.
- A prison sentence of three months.
- A device dragged along the bottom of a body of water in search of something, e.g. a dead body, or in fishing.
- A puff on a cigarette or joint.
- The last position in a line of hikers.
- A systematic search for someone over a wide area, especially by the authorities; a dragnet.
- Motion affected with slowness and difficulty, as if clogged.
- The scent-path left by dragging a fox, or some other substance such as aniseed, for training hounds to follow scents.
- Anything towed in the water to retard a ship's progress, or to keep her head up to the wind; especially, a canvas bag with a hooped mouth (drag sail), so used.
- Street, as in 'main drag'.
- A steel instrument for completing the dressing of soft stone.
- A push somewhat under the centre of the cue ball, causing it to follow the object ball a short way.
- Any force acting in opposition to the motion of an object.
- A large amount of backspin on the cue ball, causing the cue ball to slow down.
- Witch house music.
- A kind of sledge for conveying heavy objects; also, a kind of low car or handcart.
- The bottom part of a flask or mould, the upper part being the cope.
- The difference between the speed of a screw steamer under sail and that of the screw when the ship outruns the screw; or between the propulsive effects of the different floats of a paddle wheel.
- A mailcoach.
- Resistance of a fluid to something moving through it.
- Any type of clothing or costume associated with a particular occupation or subculture.
- Men's clothing worn by women for the purpose of entertainment.
- A pulled load.
- Women's clothing worn by men for the purpose of entertainment.
verb
- To act or proceed slowly or without enthusiasm; to be reluctant.
- To roast, say negative things about, or call attention to the flaws of (someone).
- To move onward heavily, laboriously, or slowly; to advance with weary effort; to go on lingeringly.
- To pull along a surface or through a medium, sometimes with difficulty.
- To hit or kick off target.
- To break (land) by drawing a drag or harrow over it; to harrow.
- To play at a slower tempo than one is supposed to or than the other musicians one is playing with, or to inadvertently gradually decrease tempo while one is playing.
- To perform as a drag queen or drag king.
- To operate a pointing device by moving it with a button held down; to move, copy, etc. (an item) in this way.
- To unintentionally rub or scrape on a surface.
- To draw along (something burdensome); hence, to pass in pain or with difficulty.
- To search for something, as a lost object or body, by dragging something along the bottom of a body of water.
- To serve as a clog or hindrance; to hold back.
- To search exhaustively, as if with a dragnet.
- To fish with a dragnet.
noun
- a tool for cutting female (internal) screw threads
- the sound made by a gentle blow
- a gentle blow
- a faucet for drawing water from a pipe or cask
- a small metal plate that attaches to the toe or heel of a shoe (as in tap dancing)
- a plug for a bunghole in a cask
- the act of tapping a telephone or telegraph line to get information
- a light touch or stroke
verb
- cut a female screw thread with a tap
- draw from or dip into to get something
- strike lightly
- draw from; make good use of
- tap a telephone or telegraph wire to get information
- furnish with a tap or spout, so as to be able to draw liquid from it
- make light, repeated taps on a surface
- walk with a tapping sound
- dance and make rhythmic clicking sounds by means of metal plates nailed to the sole of the dance shoes
- draw (liquor) from a tap
- pierce in order to draw a liquid from
- make a solicitation or entreaty for something; request urgently or persistently
noun
- A tool used to remove material so as to create a hole, typically by plunging a rotating cutting bit into a stationary workpiece.
- A light furrow or channel made to put seed into, when sowing.
- A short and highly repeatable sports training exercise designed to hone a particular skill that may be useful in competition.
- A row of seed sown in a furrow.
- The portion of a drilling tool that drives the bit.
- Any of several molluscs, of the genus Urosalpinx, especially the oyster drill (Urosalpinx cinerea), that drill holes in the shells of other animals.
- An Old World monkey of West Africa, Mandrillus leucophaeus, similar in appearance to the mandrill, but lacking the colorful face.
- A strong, durable cotton fabric with a strong bias (diagonal) in the weave.
- A style of trap music with gritty, violent lyrics, originating on the South Side of Chicago.
- An agricultural implement for making holes for sowing seed, and sometimes so formed as to contain seeds and drop them into the hole made.
- An activity done as an exercise or practice (especially a military exercise), particularly in preparation for some possible future event or occurrence.
verb
- To create (a hole) by removing material with a drill (tool).
- To have sexual intercourse with; to penetrate.
- To cause to drill (practice); to train in military arts.
- To repeat an idea frequently in order to encourage someone to remember it.
- To cause to flow in drills or rills or by trickling; to drain by trickling.
- To practice, especially in (or as in) a military context.
- To hit someone with a pitch, especially in an intentional context.
- To investigate or examine something in more detail or at a different level
- To sow (seeds) by dribbling them along a furrow or in a row.
- To shoot; to kill.
- To hit or kick with a lot of power.
noun
- A tool used for cutting thin material, consisting of two crossing blades attached at a pivot point in such a way that the blades slide across each other when the handles are closed.
- A method of skating with one foot significantly in front of the other.
- A scissors hold.
- An instance of the above dogfighting maneuver.
- An attacking move conducted by two players; the player without the ball runs from one side of the ball carrier, behind the ball carrier, and receives a pass from the ball carrier on the other side.
- A hand with the index and middle fingers open (a handshape resembling scissors), that beats paper and loses to rock. It beats lizard and loses to Spock in rock-paper-scissors-lizard-Spock.
- An exercise in which the legs are switched back and forth, suggesting the motion of scissors.
- A type of defensive maneuver in dogfighting, involving repeatedly turning one's aircraft towards that of the attacker in order to force them to overshoot.
noun
- A strip or block of wood used to distribute or direct clamping force.
- The amnion which encloses the foetus before birth, especially that part of it which sometimes shrouds a baby’s head at birth (traditionally considered to be good luck).
- The surface of a press that makes contact with panel product, especially a removable plate or sheet.
- An entry to a mill lead taken from a burn or stream (a mill lead (or mill waterway) is generally smaller than a canal but moves a large volume of water).
- Caul fat.
- A membrane.
- A style of close-fitting circular cap worn by women in the sixteenth century and later, often made of linen.
- The thin membrane which covers the lower intestines; the omentum.
English words for 'The part of a toolrest in which a cutting tool is clamped.'
As you may have noticed, above you will find words for "The part of a toolrest in which a cutting tool is clamped.". Hover the mouse over the word you'd like to know more about to view its definition. Click 
to find a better fitting word. Finally, thanks to ChatGPT, the overall results have been greatly improved.
Recent Queries
matriculation
character of a place
championship match
inefficiency
a newcomer.
thin person
one page
headhunter
to founder.
you wish!
citizen of the world
additional service
Web
gabion
Scarcity
of a firearm
one who lays pavement.
square root
D
to sag.
Strength of mind
mastermind
tending to complain.
far and wide
roofing
virtual storage
broken article
Having legs
kimchee
fast break
to be bewildered
axiom
whereas
pawning
underestimation
a chatterer.
NLP
national law
dead drunk
late
forum
straightforwardly
to conduct
to cut up
a simpleton
translation
to applaud
nut
near
painting