English words for 'Synonym of flathead screwdriver.'
Closest matches for "Synonym of flathead screwdriver." are ranked by semantic fit across dictionary definitions.
Search results
noun
- (only "flatheads" as plural) A type of screw or bolt designed to fit in a countersink so that it sits flush with a surface.
- (US, informal) Ellipsis of flathead catfish
- (only "flatheads" as plural) Synonym of side valve.
- Any fish in the family Platycephalidae.
- food fish of the Indonesian region of the Pacific; resembles gurnards
- pallid bottom-dwelling flat-headed fish with large eyes and a duck-like snout
noun
noun
- a hand tool for driving screws; has a tip that fits into the head of a screw
- A hand tool or power tool which engages with the head of a screw and allows torque to be applied to turn the screw, thus driving it in or loosening it.
- a cocktail made with vodka and orange juice
- A cocktail made of vodka and orange juice.
noun
name
- A township in White County, Illinois.
- A surname originating as a patronymic derived from Philip.
- A community in Minneapolis, Minnesota.
- An unincorporated community in El Dorado County, California.
- A village in Hamilton County, Nebraska.
- plural of Phillip
- A town in Franklin County, Maine.
- A ghost town in Hutchinson County, Texas.
- A city, the county seat of Price County, Wisconsin.
- A small town in Coal County, Oklahoma.
noun
- A screwdriver, a nutdriver, or a bit for such a tool; such bits include nutsetters.
- (chiefly in the plural) A driving wheel of a locomotive.
- A mallet.
- A person who drives livestock: a drover.
- A tamping iron.
- Something that drives something else.
- (aviation, slang) A pilot (person who flies aircraft).
- (audio) A device that converts an electrical signal to sound waves; the principal component of loudspeakers and headphones.
- A cooper's hammer for driving on barrel hoops.
- (engineering) Any driving element in any mechanism, which drives the driven element.
- A person who drives a motorized vehicle such as a car, truck, bus, train, forklift, etc.
- (golf) A golf club used to drive the ball a great distance.
- (nautical) A kind of sail, smaller than a fore and aft spanker on a square-rigged ship, a driver is tied to the same spars.
- One who drives something.
- A factor contributing to something; a cause.
- (computing) A device driver; a program that acts as an interface between an application and hardware, written specifically for the device it controls.
- (computer science) a program that determines how a computer will communicate with a peripheral device
- the operator of a motor vehicle
- a golfer who hits the golf ball with a driver
- a golf club (a wood) with a near vertical face that is used for hitting long shots from the tee
- someone who drives animals that pull a vehicle
noun
- a tool consisting of a number of fine abrasive slips held in a machine head, rotated and reciprocated to impart a smooth finish to cylinder bores, etc.
- a whetstone made of fine gritstone; used for sharpening razors
- A kind of swelling in the cheek.
- A machine tool used in the manufacture of precision bores.
- A sharpening stone composed of extra-fine grit used for removing the burr or curl from the blade of a razor or some other edge tool.
verb
- sharpen with a hone
- make perfect or complete
- (UK, US, Southern US, dialect, intransitive) To grumble.
- (transitive) To use a hone to produce a precision bore.
- (UK, US, Southern US, dialect) To pine, lament, or long.
- To make more acute, intense, or effective.
- (transitive) To sharpen with a hone; to whet.
- (transitive) To refine (a skill especially) by learning.
intj
noun
- Any screw used to hold or adjust a setting, via fixation in a certain location or position: frequently a headless one, but may also be any other machine screw or thumb screw used for the purpose of setting.
- (New Zealand) A screw with a head, usually hexagonal, like a bolt but without a shank to allow it to screw into material rather than take a nut; a tap bolt.
- A headless screw with threads along the entire length. Typically, such screws have a hex or slot drive recessed in the threaded length.
noun
- A roundhead screw, one with a domed head.
- A circular platform at the end of a pier or breakwater.
- (historical) Alternative letter-case form of Roundhead (“parliament supporter in the English Civil War”)
- Any of various agarics of the genus Stropharia.
- (slang) A male whose penis is circumcised.
- a brachycephalic person
adj
noun
- A screw with a cross-shaped indentation for gripping and turning, as opposed to a flathead.
- (journalism) Large text, like a headline but typically drawn from the article, placed partway through the article to break it up visually.
- (musical notation) A note with an x-shaped notehead, indicating a non-tonal sound such as a drumbeat or a rapped syllable.
- (mechanical engineering) A metal beam that connects a piston to a connecting rod in an engine.
- metal block that connects to a piston; it slides on parallel guides and moves a connecting rod back and forth
- a heading of a subsection printed within the body of the text
noun
- the flat part of a tool or weapon that (usually) has a cutting edge
- something long and thin resembling a blade of grass
- a cutting or thrusting weapon that has a long metal blade and a hilt with a hand guard
- flat surface that rotates and pushes against air or water
- a cut of beef from the shoulder blade
- a broad flat body part (as of the shoulder or tongue)
- especially a leaf of grass or the broad portion of a leaf as distinct from the petiole
- a dashing young man
- the part of the skate that slides on the ice
- Ellipsis of razor blade.
- (sailing) The rudder, daggerboard, or centerboard of a vessel.
- Thin plate, foil.
- (mathematics) An exterior product of vectors. (The product may have more than two factors. Also, a scalar counts as a 0-blade, a vector as a 1-blade; an exterior product of k vectors may be called a k-blade.)
- (climbing) Synonym of knifeblade.
- (ultimate frisbee) A throw characterized by a tight parabolic trajectory due to a steep lateral attitude.
- (athletics, informal) An artificial foot used by amputee athletes, shaped like an upside-down question mark.
- A bulldozer or surface-grading machine with mechanically adjustable blade that is nominally perpendicular to the forward motion of the vehicle.
- The (typically sharp-edged) part of a knife, sword, razor, or other tool with which it cuts.
- (archaeology) A piece of prepared, sharp-edged stone, often flint, at least twice as long as it is wide; a long flake of ground-edge stone or knapped vitreous stone.
- (architecture, in the plural) The principal rafters of a roof.
- (uncountable, music) The quality of singing with a pure, resonant sound; especially of a countertenor.
- The part of a key that is inserted into the lock.
- (botany) The thin, flat part of a plant leaf, attached to a stem (petiole).
- A cut of beef from near the shoulder blade (part of the chuck).
- (slang, chiefly US) A homosexual, usually male.
- (computing) Ellipsis of blade server.
- (metonymic) A sword or knife.
- (photography) One of a series of small plates that make up the aperture or the shutter of a camera.
- (slang, chiefly US) An area of a city which is commonly known for prostitution.
- (biology) The four large shell plates on the sides, and the five large ones of the middle, of the carapace of the sea turtle, which yield the best tortoise shell.
- The flat functional end or piece of a propeller, oar, hockey stick, chisel, screwdriver, skate, etc.
- A flat bone, especially the shoulder blade.
- (chiefly phonetics, phonology) The part of the tongue just behind the tip, used to make laminal consonants.
- The narrow leaf of a grass or cereal.
verb
noun
- (mechanics) A cylindrical tool used to cut an internal screw thread in a hole, with cutting edges around the lower end and an upper end to which a handle is fitted to turn the tool.
- A device used to listen in secretly on telephone calls or other communications.
- (graphical user interface) An act of touching a button, icon, or specific location on the touch screen of an electronic device such as a mobile phone to invoke a function.
- (informal, minimizer, chiefly in the negative) The smallest amount of work; a stroke of work.
- A conical peg or pin used to close and open the hole or vent in a container.
- (British) Ellipsis of taphouse or taproom (“place where alcoholic beverages are served on tap”).
- (British, electrical engineering, mechanical engineering) A connection made to an electrical or fluid conductor without breaking it; a tapping.
- (uncountable, dance) Ellipsis of tap dance.
- A secret interception of telephone calls or other communications using such a device; also, a recording of such a communication.
- (medicine, informal) A procedure that removes fluid from a body cavity; paracentesis.
- (British, dialectal or US) A piece of leather or other material fastened upon the bottom of an item of footwear when repairing the heel or sole; also (England, dialectal) the sole of an item of footwear.
- (phonetics) A single muscle contraction in vocal organs causing a consonant sound; also, the sound so made.
- (dance) One of the metal pieces attached to the sole of a tap dancer's shoe at the toe and heel to cause a tapping sound.
- A light blow or strike with a clear sound; a gentle rap; a pat; also, the sound made by such a blow or strike.
- (firearms, slang) A shot fired from a firearm.
- An object with a tapering conical form like a tap (etymology 1 sense 1); specifically, ellipsis of taproot (“long, tapering root of a plant”).
- A hollow device used to control the flow of a fluid, such as an alcoholic beverage from a cask, or a gas or liquid in a pipe.
- (finance) A situation where a borrowing government authority issues bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions.
- (India, chiefly East India) A malarial fever.
- Liquor drawn through a tap (etymology 1 sense 2.2); hence, a certain kind or quality of liquor; also (figurative, informal), a certain kind or quality of any thing.
- a light touch or stroke
- a plug for a bunghole in a cask
- the sound made by a gentle blow
- a tool for cutting female (internal) screw threads
- a gentle blow
- a faucet for drawing water from a pipe or cask
- a small metal plate that attaches to the toe or heel of a shoe (as in tap dancing)
- the act of tapping a telephone or telegraph line to get information
verb
- (poker) To force (an opponent) to place all their poker chips in the pot (that is, to go all in) by wagering all of one's own chips.
- (informal) To ask or beg for (something) to be given for free; to cadge, to scrounge; also, to ask or beg (someone) to give something for free.
- To cut an external screw thread into (a bolt or rod) to create a screw.
- To draw off (a liquid) from a container or other source; also, to draw off a liquid from (a container or other source).
- (medicine, informal) To drain off fluid from (a person or a body cavity) by paracentesis.
- (chiefly US, informal) To choose or designate (someone) for a duty, an honour, membership of an organization, or a position.
- (slang) To shoot (someone or something) with a firearm.
- (slang, vulgar) To have sexual intercourse with (someone).
- (combat sports) To submit to an opponent, chiefly by indicating an intention to do so by striking a hand on the ground several times; to tap out.
- Often followed by at or on: to strike lightly with a clear sound; also, to make a sharp noise through this action.
- (communication, chiefly law enforcement) To connect a listening and/or recording device to (a communication cable or device) in order to listen in secretly on telephone calls or other communications; also, to secretly listen in on and/or record (a telephone call or other communication).
- (transitive) To lightly touch a touchscreen, usually an icon or button, to activate a function.
- Of a bell, a drum, etc.: to make a sharp noise, often as a signal.
- (slang) Also in the form tap on the shoulder: to arrest (someone).
- To break into or open up (a thing) so as to obtain something; to exploit, to penetrate; tap into.
- To furnish (a container, etc.) with a tap (noun etymology 1 sense 2.2) so that liquid can be drawn.
- To put (a screw or other object) in or through another thing.
- To click on something, usually a device.
- (graphical user interface) To invoke a function on an electronic device such as a mobile phone by touching (a button, icon, or specific location on its touch screen).
- To strike (someone or something), chiefly lightly with a clear sound, but sometimes hard.
- To walk by striking the ground lightly with a clear sound.
- (combat sports) To force (an opponent) to submit, chiefly by indicating their intention to do so by striking a hand on the ground several times; to tap out.
- (British, dialectal or US) To repair (an item of footwear) by putting on a new heel or sole, or a piece of material on to the heel or sole.
- To (lightly) touch (a finger, foot, or other body part) on a surface, often repeatedly.
- To deplete (something); to tap out.
- To act as a tapster; to draw an alcoholic beverage from a container.
- (horticulture) To remove a taproot from (a plant).
- (board games, card games) To turn over (a playing card or playing piece) to remind players that it has already been used in that round.
- To cut an internal screw thread in (a hole); also, to cut (an internal screw thread) in a hole, or to create an internally threaded hole in (something).
- (transitive) To lightly and repeatedly touch (a person or one or more body parts) as part of various forms of psychological treatment.
- make a solicitation or entreaty for something; request urgently or persistently
- draw (liquor) from a tap
- tap a telephone or telegraph wire to get information
- cut a female screw thread with a tap
- draw from or dip into to get something
- pierce in order to draw a liquid from
- dance and make rhythmic clicking sounds by means of metal plates nailed to the sole of the dance shoes
- furnish with a tap or spout, so as to be able to draw liquid from it
- make light, repeated taps on a surface
- strike lightly
- draw from; make good use of
- walk with a tapping sound
noun
- A tightening screw on the back of a hand tool.
- (ping-pong) A half-volley executed by holding the racket loosely and swinging it straight at the ball.
- A hook-shapped attachment for an earring that sits behind the earlobe and tightens with a screw. Also, an earring that uses this type of attachment.
- An industrial digging machine that uses a large screw at the back to drill into the ground.
- A type of case for a pocket watch where the mechanism is accessed by a removable back plate that screws onto the back of the case. Also, a watch that has such a case.
- (golf) A powerful shot that imparts a spin to the ball.
- The period of screw rotation during injection molding when the plastic can flow into the mold.
- A type of propeller in which the blades are angled to produce a motion similar to threading a screw. Also, the angle of the blades on such a propeller.
- A mechanism for attaching a small item to clothing that operates by a post which goes through the cloth and a small backing plate that screws to the post. Also, the medal, tie pin, button, etc. that uses this type of attachment.
- (snooker, pool, billiards) The effect of putting backspin on the cue ball.
- (architecture) A masonry abutment on an arch that is wedge-shaped in order to transmit the thrust downward.
noun
- (engineering) A screw thread.
- (weaving) A piece of yarn, especially said of warps and wefts in a woven fabric.
- (computing) A unit of execution, lighter in weight than a process, usually sharing memory and other resources with other threads executing concurrently.
- A continuing theme that modifies the whole discourse.
- A precarious condition; something that which offers no real or otherwise perceived security.
- A cord formed by spinning or twisting together textile fibers or filaments into one or more continuous strands, typically used in needlework.
- The continuing course of life; the thread of life.
- A line of reasoning, sequence of ideas, or train of thought.
- A sequence of connections.
- (Internet) A series of posts or messages, consisting of an initial post and responses to it, generally relating to the same subject, on a newsgroup, Internet forum, or social media platform.
- The line midway between the banks of a stream.
- Any of various natural (as spiderweb, etc.) or manufactured filaments (as glass, plastic, metal, etc.).
- A slender stream of water.
- the raised helical rib going around a screw
- a fine cord of twisted fibers (of cotton or silk or wool or nylon etc.) used in sewing and weaving
- any long object resembling a thin line
- the connections that link the various parts of an event or argument together
verb
- (intransitive) Of boiling syrup: To form a threadlike stream when poured from a spoon.
- (transitive) To fix (beads, pearls, etc.) upon a thread that is passed through; to string.
- To cautiously make (one's way) through a precarious place or situation.
- (transitive) To interweave as if with thread; to intersperse.
- (transitive) To pass a thread through the eye of a needle.
- (ambitransitive) To feed (a sewing machine or otherwise a projecting or exposing mechanism, such as a projector, a camera, etc.) with film. [(usually) with up]
- (transitive, figurative) To pass through; to pierce through; to penetrate.
- (transitive) To pass (a film or tape) through a projector, recorder, etc. so as to correct its path.
- (ambitransitive) To remove (facial hair) by way of a looped thread that is tightly wound in the middle.
- (transitive) To form a screw thread on or in (a bolt, hole, etc.).
- (transitive, figurative) To make one's way through or between (a constriction or obstacles).
- pass a thread through
- to move or cause to move in a sinuous, spiral, or circular course
- thread on or as if on a string
- remove facial hair by tying a fine string around it and pulling at the string
- pass through or into
noun
verb
noun
- (metalworking) A type of die for cutting screw threads on male fasteners; it is arranged in the form of a plate of tool steel with a graduated series of holes, each being the die opening for a certain size of screw. A predecessor of today's tap and die sets, it is now considered an antique type of tool, no longer in common use but still sometimes desirable as a collectible among tool collectors.
- A die in the form of a metal plate.
- A metal plate that is part of a die.
noun
- A rotary cutting tool, fitted to a drill, brace, or router, used to bore or drill holes or to remove material from the profile of the workpiece.
- (in the plural, informal, sports) Fractions of a second.
- (informal) A small fraction above a whole number.
- (slang) A gag or put-on; a humorous conceit, especially when insistently presented as true.
- The cutting iron of a plane.
- The part of a key which enters the lock and acts upon the bolt and tumblers.
- An excerpt of material making up part of a show, comedy routine, etc.
- A piece of metal placed in a horse's mouth and connected to the reins to direct the animal.
- (mathematics, computing) A binary digit, generally represented as a 1 or 0.
- The bevelled front edge of an axehead along which the cutting edge runs.
- Ellipsis of bit part.
- A portion of something.
- A replaceable tip for a hand tool or power tool, comprising the portion that drives a fastener.
- (MLE) A gun.
- (BDSM) A gag of a style similar to a bridle.
- (computing) The smallest unit of storage in a digital computer, consisting of a binary digit.
- (historical) A unit of currency and coin of the British West Indies worth six black dogs, originally equal to one-eighth of a Spanish dollar but later increasingly debased to one tenth, one eleventh, one twelfth, etc.
- (information theory) A unit of measure for information entropy.
- (historical) A unit of currency of the Dutch West Indies in the early 20th century, worth one fifth of a cent.
- Somewhat; something, but not very great; also used like jot and whit to express the smallest degree. See also a bit.
- Synonym of microbitcoin.
- (historical, US and Canada) A unit of currency worth one eighth of a dollar, originally of a Spanish dollar but later also US or Canadian; also, a coin with this value, in particular the silver Spanish real.
- (slang) A prison sentence, especially a short one.
- A small amount of something.
- (informal) Specifically, a small amount of time.
- (information theory, cryptography) Any datum that may take on one of exactly two values.
- A microbitcoin, or a millionth of a bitcoin (0.000001 BTC).
- a small amount of solid food; a mouthful
- a small piece or quantity of something
- a small fragment of something broken off from the whole
- a short performance that is part of a longer program
- a small fragment
- the cutting part of a drill; usually pointed and threaded and is replaceable in a brace or bitstock or drill press
- piece of metal held in horse's mouth by reins and used to control the horse while riding
- an instance of some kind
- a unit of measurement of information (from binary + digit); the amount of information in a system having two equiprobable states
- the part of a key that enters a lock and lifts the tumblers
- an indefinitely short time
adj
verb
verb
- (transitive) To connect or assemble pieces using a screw.
- (transitive, slang) To cheat someone or ruin their chances in a game or other situation.
- (transitive) To contort.
- (ambitransitive, vulgar, slang) To have sexual intercourse with.
- (colloquial, transitive) To give up on, to abandon, delay, to not think about someone or something.
- (soccer, transitive) To miskick (a ball) by hitting it with the wrong part of the foot.
- (billiards, snooker, pool) To screw back.
- (transitive) To extort or practice extortion upon; to oppress by unreasonable or extortionate exactions; to put the screws on.
- (colloquial, transitive, imperative, mildly vulgar) Used to express great displeasure with, or contemptuous dismissal of, someone or something.
- cause to penetrate, as with a circular motion
- have sexual intercourse with
- defeat someone through trickery or deceit
- tighten or fasten by means of screwing motions
- turn like a screw
noun
- (vulgar, slang) A casual sexual partner.
- (nautical) A ship's propeller.
- A (usually) metal fastener consisting of a partially or completely threaded shank, sometimes with a threaded point, and a head used to both hold the top material and to drive the screw either directly into a soft material or into a prepared hole.
- An Archimedes screw.
- (informal, in the plural, with "the") Rheumatism.
- (vulgar, slang) Sexual intercourse; the act of screwing.
- (mathematics) A straight line in space with which a definite linear magnitude termed the pitch is associated. It is used to express the displacement of a rigid body, which may always be made to consist of a rotation about an axis combined with a translation parallel to that axis.
- (slang, derogatory) A prison guard.
- (snooker, billiards) Backspin.
- (slang, derogatory) An extortioner; a sharp bargainer; a skinflint.
- An amphipod crustacean.
- A simple machine, a helical inclined plane.
- A steam vessel propelled by a screw instead of wheels.
- The motion of screwing something; a turn or twist to one side.
- a simple machine of the inclined-plane type consisting of a spirally threaded cylindrical rod that engages with a similarly threaded hole
- someone who guards prisoners
- a propeller with several angled blades that rotates to push against water or air
- slang for sexual intercourse
- a fastener with a tapered threaded shank and a slotted head
noun
- (only "flatheads" as plural) A type of screw or bolt designed to fit in a countersink so that it sits flush with a surface.
- (US, informal) Ellipsis of flathead catfish
- (only "flatheads" as plural) Synonym of side valve.
- Any fish in the family Platycephalidae.
- food fish of the Indonesian region of the Pacific; resembles gurnards
- pallid bottom-dwelling flat-headed fish with large eyes and a duck-like snout
noun
noun
- a hand tool for driving screws; has a tip that fits into the head of a screw
- A hand tool or power tool which engages with the head of a screw and allows torque to be applied to turn the screw, thus driving it in or loosening it.
- a cocktail made with vodka and orange juice
- A cocktail made of vodka and orange juice.
noun
name
- A township in White County, Illinois.
- A surname originating as a patronymic derived from Philip.
- A community in Minneapolis, Minnesota.
- An unincorporated community in El Dorado County, California.
- A village in Hamilton County, Nebraska.
- plural of Phillip
- A town in Franklin County, Maine.
- A ghost town in Hutchinson County, Texas.
- A city, the county seat of Price County, Wisconsin.
- A small town in Coal County, Oklahoma.
noun
- A screwdriver, a nutdriver, or a bit for such a tool; such bits include nutsetters.
- (chiefly in the plural) A driving wheel of a locomotive.
- A mallet.
- A person who drives livestock: a drover.
- A tamping iron.
- Something that drives something else.
- (aviation, slang) A pilot (person who flies aircraft).
- (audio) A device that converts an electrical signal to sound waves; the principal component of loudspeakers and headphones.
- A cooper's hammer for driving on barrel hoops.
- (engineering) Any driving element in any mechanism, which drives the driven element.
- A person who drives a motorized vehicle such as a car, truck, bus, train, forklift, etc.
- (golf) A golf club used to drive the ball a great distance.
- (nautical) A kind of sail, smaller than a fore and aft spanker on a square-rigged ship, a driver is tied to the same spars.
- One who drives something.
- A factor contributing to something; a cause.
- (computing) A device driver; a program that acts as an interface between an application and hardware, written specifically for the device it controls.
- (computer science) a program that determines how a computer will communicate with a peripheral device
- the operator of a motor vehicle
- a golfer who hits the golf ball with a driver
- a golf club (a wood) with a near vertical face that is used for hitting long shots from the tee
- someone who drives animals that pull a vehicle
noun
- a tool consisting of a number of fine abrasive slips held in a machine head, rotated and reciprocated to impart a smooth finish to cylinder bores, etc.
- a whetstone made of fine gritstone; used for sharpening razors
- A kind of swelling in the cheek.
- A machine tool used in the manufacture of precision bores.
- A sharpening stone composed of extra-fine grit used for removing the burr or curl from the blade of a razor or some other edge tool.
verb
- sharpen with a hone
- make perfect or complete
- (UK, US, Southern US, dialect, intransitive) To grumble.
- (transitive) To use a hone to produce a precision bore.
- (UK, US, Southern US, dialect) To pine, lament, or long.
- To make more acute, intense, or effective.
- (transitive) To sharpen with a hone; to whet.
- (transitive) To refine (a skill especially) by learning.
intj
noun
- Any screw used to hold or adjust a setting, via fixation in a certain location or position: frequently a headless one, but may also be any other machine screw or thumb screw used for the purpose of setting.
- (New Zealand) A screw with a head, usually hexagonal, like a bolt but without a shank to allow it to screw into material rather than take a nut; a tap bolt.
- A headless screw with threads along the entire length. Typically, such screws have a hex or slot drive recessed in the threaded length.
noun
- A roundhead screw, one with a domed head.
- A circular platform at the end of a pier or breakwater.
- (historical) Alternative letter-case form of Roundhead (“parliament supporter in the English Civil War”)
- Any of various agarics of the genus Stropharia.
- (slang) A male whose penis is circumcised.
- a brachycephalic person
adj
noun
- A screw with a cross-shaped indentation for gripping and turning, as opposed to a flathead.
- (journalism) Large text, like a headline but typically drawn from the article, placed partway through the article to break it up visually.
- (musical notation) A note with an x-shaped notehead, indicating a non-tonal sound such as a drumbeat or a rapped syllable.
- (mechanical engineering) A metal beam that connects a piston to a connecting rod in an engine.
- metal block that connects to a piston; it slides on parallel guides and moves a connecting rod back and forth
- a heading of a subsection printed within the body of the text
noun
- the flat part of a tool or weapon that (usually) has a cutting edge
- something long and thin resembling a blade of grass
- a cutting or thrusting weapon that has a long metal blade and a hilt with a hand guard
- flat surface that rotates and pushes against air or water
- a cut of beef from the shoulder blade
- a broad flat body part (as of the shoulder or tongue)
- especially a leaf of grass or the broad portion of a leaf as distinct from the petiole
- a dashing young man
- the part of the skate that slides on the ice
- Ellipsis of razor blade.
- (sailing) The rudder, daggerboard, or centerboard of a vessel.
- Thin plate, foil.
- (mathematics) An exterior product of vectors. (The product may have more than two factors. Also, a scalar counts as a 0-blade, a vector as a 1-blade; an exterior product of k vectors may be called a k-blade.)
- (climbing) Synonym of knifeblade.
- (ultimate frisbee) A throw characterized by a tight parabolic trajectory due to a steep lateral attitude.
- (athletics, informal) An artificial foot used by amputee athletes, shaped like an upside-down question mark.
- A bulldozer or surface-grading machine with mechanically adjustable blade that is nominally perpendicular to the forward motion of the vehicle.
- The (typically sharp-edged) part of a knife, sword, razor, or other tool with which it cuts.
- (archaeology) A piece of prepared, sharp-edged stone, often flint, at least twice as long as it is wide; a long flake of ground-edge stone or knapped vitreous stone.
- (architecture, in the plural) The principal rafters of a roof.
- (uncountable, music) The quality of singing with a pure, resonant sound; especially of a countertenor.
- The part of a key that is inserted into the lock.
- (botany) The thin, flat part of a plant leaf, attached to a stem (petiole).
- A cut of beef from near the shoulder blade (part of the chuck).
- (slang, chiefly US) A homosexual, usually male.
- (computing) Ellipsis of blade server.
- (metonymic) A sword or knife.
- (photography) One of a series of small plates that make up the aperture or the shutter of a camera.
- (slang, chiefly US) An area of a city which is commonly known for prostitution.
- (biology) The four large shell plates on the sides, and the five large ones of the middle, of the carapace of the sea turtle, which yield the best tortoise shell.
- The flat functional end or piece of a propeller, oar, hockey stick, chisel, screwdriver, skate, etc.
- A flat bone, especially the shoulder blade.
- (chiefly phonetics, phonology) The part of the tongue just behind the tip, used to make laminal consonants.
- The narrow leaf of a grass or cereal.
verb
noun
- (mechanics) A cylindrical tool used to cut an internal screw thread in a hole, with cutting edges around the lower end and an upper end to which a handle is fitted to turn the tool.
- A device used to listen in secretly on telephone calls or other communications.
- (graphical user interface) An act of touching a button, icon, or specific location on the touch screen of an electronic device such as a mobile phone to invoke a function.
- (informal, minimizer, chiefly in the negative) The smallest amount of work; a stroke of work.
- A conical peg or pin used to close and open the hole or vent in a container.
- (British) Ellipsis of taphouse or taproom (“place where alcoholic beverages are served on tap”).
- (British, electrical engineering, mechanical engineering) A connection made to an electrical or fluid conductor without breaking it; a tapping.
- (uncountable, dance) Ellipsis of tap dance.
- A secret interception of telephone calls or other communications using such a device; also, a recording of such a communication.
- (medicine, informal) A procedure that removes fluid from a body cavity; paracentesis.
- (British, dialectal or US) A piece of leather or other material fastened upon the bottom of an item of footwear when repairing the heel or sole; also (England, dialectal) the sole of an item of footwear.
- (phonetics) A single muscle contraction in vocal organs causing a consonant sound; also, the sound so made.
- (dance) One of the metal pieces attached to the sole of a tap dancer's shoe at the toe and heel to cause a tapping sound.
- A light blow or strike with a clear sound; a gentle rap; a pat; also, the sound made by such a blow or strike.
- (firearms, slang) A shot fired from a firearm.
- An object with a tapering conical form like a tap (etymology 1 sense 1); specifically, ellipsis of taproot (“long, tapering root of a plant”).
- A hollow device used to control the flow of a fluid, such as an alcoholic beverage from a cask, or a gas or liquid in a pipe.
- (finance) A situation where a borrowing government authority issues bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions.
- (India, chiefly East India) A malarial fever.
- Liquor drawn through a tap (etymology 1 sense 2.2); hence, a certain kind or quality of liquor; also (figurative, informal), a certain kind or quality of any thing.
- a light touch or stroke
- a plug for a bunghole in a cask
- the sound made by a gentle blow
- a tool for cutting female (internal) screw threads
- a gentle blow
- a faucet for drawing water from a pipe or cask
- a small metal plate that attaches to the toe or heel of a shoe (as in tap dancing)
- the act of tapping a telephone or telegraph line to get information
verb
- (poker) To force (an opponent) to place all their poker chips in the pot (that is, to go all in) by wagering all of one's own chips.
- (informal) To ask or beg for (something) to be given for free; to cadge, to scrounge; also, to ask or beg (someone) to give something for free.
- To cut an external screw thread into (a bolt or rod) to create a screw.
- To draw off (a liquid) from a container or other source; also, to draw off a liquid from (a container or other source).
- (medicine, informal) To drain off fluid from (a person or a body cavity) by paracentesis.
- (chiefly US, informal) To choose or designate (someone) for a duty, an honour, membership of an organization, or a position.
- (slang) To shoot (someone or something) with a firearm.
- (slang, vulgar) To have sexual intercourse with (someone).
- (combat sports) To submit to an opponent, chiefly by indicating an intention to do so by striking a hand on the ground several times; to tap out.
- Often followed by at or on: to strike lightly with a clear sound; also, to make a sharp noise through this action.
- (communication, chiefly law enforcement) To connect a listening and/or recording device to (a communication cable or device) in order to listen in secretly on telephone calls or other communications; also, to secretly listen in on and/or record (a telephone call or other communication).
- (transitive) To lightly touch a touchscreen, usually an icon or button, to activate a function.
- Of a bell, a drum, etc.: to make a sharp noise, often as a signal.
- (slang) Also in the form tap on the shoulder: to arrest (someone).
- To break into or open up (a thing) so as to obtain something; to exploit, to penetrate; tap into.
- To furnish (a container, etc.) with a tap (noun etymology 1 sense 2.2) so that liquid can be drawn.
- To put (a screw or other object) in or through another thing.
- To click on something, usually a device.
- (graphical user interface) To invoke a function on an electronic device such as a mobile phone by touching (a button, icon, or specific location on its touch screen).
- To strike (someone or something), chiefly lightly with a clear sound, but sometimes hard.
- To walk by striking the ground lightly with a clear sound.
- (combat sports) To force (an opponent) to submit, chiefly by indicating their intention to do so by striking a hand on the ground several times; to tap out.
- (British, dialectal or US) To repair (an item of footwear) by putting on a new heel or sole, or a piece of material on to the heel or sole.
- To (lightly) touch (a finger, foot, or other body part) on a surface, often repeatedly.
- To deplete (something); to tap out.
- To act as a tapster; to draw an alcoholic beverage from a container.
- (horticulture) To remove a taproot from (a plant).
- (board games, card games) To turn over (a playing card or playing piece) to remind players that it has already been used in that round.
- To cut an internal screw thread in (a hole); also, to cut (an internal screw thread) in a hole, or to create an internally threaded hole in (something).
- (transitive) To lightly and repeatedly touch (a person or one or more body parts) as part of various forms of psychological treatment.
- make a solicitation or entreaty for something; request urgently or persistently
- draw (liquor) from a tap
- tap a telephone or telegraph wire to get information
- cut a female screw thread with a tap
- draw from or dip into to get something
- pierce in order to draw a liquid from
- dance and make rhythmic clicking sounds by means of metal plates nailed to the sole of the dance shoes
- furnish with a tap or spout, so as to be able to draw liquid from it
- make light, repeated taps on a surface
- strike lightly
- draw from; make good use of
- walk with a tapping sound
noun
- A tightening screw on the back of a hand tool.
- (ping-pong) A half-volley executed by holding the racket loosely and swinging it straight at the ball.
- A hook-shapped attachment for an earring that sits behind the earlobe and tightens with a screw. Also, an earring that uses this type of attachment.
- An industrial digging machine that uses a large screw at the back to drill into the ground.
- A type of case for a pocket watch where the mechanism is accessed by a removable back plate that screws onto the back of the case. Also, a watch that has such a case.
- (golf) A powerful shot that imparts a spin to the ball.
- The period of screw rotation during injection molding when the plastic can flow into the mold.
- A type of propeller in which the blades are angled to produce a motion similar to threading a screw. Also, the angle of the blades on such a propeller.
- A mechanism for attaching a small item to clothing that operates by a post which goes through the cloth and a small backing plate that screws to the post. Also, the medal, tie pin, button, etc. that uses this type of attachment.
- (snooker, pool, billiards) The effect of putting backspin on the cue ball.
- (architecture) A masonry abutment on an arch that is wedge-shaped in order to transmit the thrust downward.
noun
- (engineering) A screw thread.
- (weaving) A piece of yarn, especially said of warps and wefts in a woven fabric.
- (computing) A unit of execution, lighter in weight than a process, usually sharing memory and other resources with other threads executing concurrently.
- A continuing theme that modifies the whole discourse.
- A precarious condition; something that which offers no real or otherwise perceived security.
- A cord formed by spinning or twisting together textile fibers or filaments into one or more continuous strands, typically used in needlework.
- The continuing course of life; the thread of life.
- A line of reasoning, sequence of ideas, or train of thought.
- A sequence of connections.
- (Internet) A series of posts or messages, consisting of an initial post and responses to it, generally relating to the same subject, on a newsgroup, Internet forum, or social media platform.
- The line midway between the banks of a stream.
- Any of various natural (as spiderweb, etc.) or manufactured filaments (as glass, plastic, metal, etc.).
- A slender stream of water.
- the raised helical rib going around a screw
- a fine cord of twisted fibers (of cotton or silk or wool or nylon etc.) used in sewing and weaving
- any long object resembling a thin line
- the connections that link the various parts of an event or argument together
verb
- (intransitive) Of boiling syrup: To form a threadlike stream when poured from a spoon.
- (transitive) To fix (beads, pearls, etc.) upon a thread that is passed through; to string.
- To cautiously make (one's way) through a precarious place or situation.
- (transitive) To interweave as if with thread; to intersperse.
- (transitive) To pass a thread through the eye of a needle.
- (ambitransitive) To feed (a sewing machine or otherwise a projecting or exposing mechanism, such as a projector, a camera, etc.) with film. [(usually) with up]
- (transitive, figurative) To pass through; to pierce through; to penetrate.
- (transitive) To pass (a film or tape) through a projector, recorder, etc. so as to correct its path.
- (ambitransitive) To remove (facial hair) by way of a looped thread that is tightly wound in the middle.
- (transitive) To form a screw thread on or in (a bolt, hole, etc.).
- (transitive, figurative) To make one's way through or between (a constriction or obstacles).
- pass a thread through
- to move or cause to move in a sinuous, spiral, or circular course
- thread on or as if on a string
- remove facial hair by tying a fine string around it and pulling at the string
- pass through or into
noun
verb
noun
- (metalworking) A type of die for cutting screw threads on male fasteners; it is arranged in the form of a plate of tool steel with a graduated series of holes, each being the die opening for a certain size of screw. A predecessor of today's tap and die sets, it is now considered an antique type of tool, no longer in common use but still sometimes desirable as a collectible among tool collectors.
- A die in the form of a metal plate.
- A metal plate that is part of a die.
noun
- A rotary cutting tool, fitted to a drill, brace, or router, used to bore or drill holes or to remove material from the profile of the workpiece.
- (in the plural, informal, sports) Fractions of a second.
- (informal) A small fraction above a whole number.
- (slang) A gag or put-on; a humorous conceit, especially when insistently presented as true.
- The cutting iron of a plane.
- The part of a key which enters the lock and acts upon the bolt and tumblers.
- An excerpt of material making up part of a show, comedy routine, etc.
- A piece of metal placed in a horse's mouth and connected to the reins to direct the animal.
- (mathematics, computing) A binary digit, generally represented as a 1 or 0.
- The bevelled front edge of an axehead along which the cutting edge runs.
- Ellipsis of bit part.
- A portion of something.
- A replaceable tip for a hand tool or power tool, comprising the portion that drives a fastener.
- (MLE) A gun.
- (BDSM) A gag of a style similar to a bridle.
- (computing) The smallest unit of storage in a digital computer, consisting of a binary digit.
- (historical) A unit of currency and coin of the British West Indies worth six black dogs, originally equal to one-eighth of a Spanish dollar but later increasingly debased to one tenth, one eleventh, one twelfth, etc.
- (information theory) A unit of measure for information entropy.
- (historical) A unit of currency of the Dutch West Indies in the early 20th century, worth one fifth of a cent.
- Somewhat; something, but not very great; also used like jot and whit to express the smallest degree. See also a bit.
- Synonym of microbitcoin.
- (historical, US and Canada) A unit of currency worth one eighth of a dollar, originally of a Spanish dollar but later also US or Canadian; also, a coin with this value, in particular the silver Spanish real.
- (slang) A prison sentence, especially a short one.
- A small amount of something.
- (informal) Specifically, a small amount of time.
- (information theory, cryptography) Any datum that may take on one of exactly two values.
- A microbitcoin, or a millionth of a bitcoin (0.000001 BTC).
- a small amount of solid food; a mouthful
- a small piece or quantity of something
- a small fragment of something broken off from the whole
- a short performance that is part of a longer program
- a small fragment
- the cutting part of a drill; usually pointed and threaded and is replaceable in a brace or bitstock or drill press
- piece of metal held in horse's mouth by reins and used to control the horse while riding
- an instance of some kind
- a unit of measurement of information (from binary + digit); the amount of information in a system having two equiprobable states
- the part of a key that enters a lock and lifts the tumblers
- an indefinitely short time
adj
verb
verb
- (transitive) To connect or assemble pieces using a screw.
- (transitive, slang) To cheat someone or ruin their chances in a game or other situation.
- (transitive) To contort.
- (ambitransitive, vulgar, slang) To have sexual intercourse with.
- (colloquial, transitive) To give up on, to abandon, delay, to not think about someone or something.
- (soccer, transitive) To miskick (a ball) by hitting it with the wrong part of the foot.
- (billiards, snooker, pool) To screw back.
- (transitive) To extort or practice extortion upon; to oppress by unreasonable or extortionate exactions; to put the screws on.
- (colloquial, transitive, imperative, mildly vulgar) Used to express great displeasure with, or contemptuous dismissal of, someone or something.
- cause to penetrate, as with a circular motion
- have sexual intercourse with
- defeat someone through trickery or deceit
- tighten or fasten by means of screwing motions
- turn like a screw
noun
- (vulgar, slang) A casual sexual partner.
- (nautical) A ship's propeller.
- A (usually) metal fastener consisting of a partially or completely threaded shank, sometimes with a threaded point, and a head used to both hold the top material and to drive the screw either directly into a soft material or into a prepared hole.
- An Archimedes screw.
- (informal, in the plural, with "the") Rheumatism.
- (vulgar, slang) Sexual intercourse; the act of screwing.
- (mathematics) A straight line in space with which a definite linear magnitude termed the pitch is associated. It is used to express the displacement of a rigid body, which may always be made to consist of a rotation about an axis combined with a translation parallel to that axis.
- (slang, derogatory) A prison guard.
- (snooker, billiards) Backspin.
- (slang, derogatory) An extortioner; a sharp bargainer; a skinflint.
- An amphipod crustacean.
- A simple machine, a helical inclined plane.
- A steam vessel propelled by a screw instead of wheels.
- The motion of screwing something; a turn or twist to one side.
- a simple machine of the inclined-plane type consisting of a spirally threaded cylindrical rod that engages with a similarly threaded hole
- someone who guards prisoners
- a propeller with several angled blades that rotates to push against water or air
- slang for sexual intercourse
- a fastener with a tapered threaded shank and a slotted head
No matching words found. Try a broader description.