Слова на English для 'Alternative form of screwdriver.'
Выше показаны слова, связанные с "Alternative form of screwdriver.". Наведите курсор или фокус на слово, чтобы увидеть его определение.
Результаты поиска
noun
noun
name
- A township in White County, Illinois.
- A surname originating as a patronymic derived from Philip.
- A community in Minneapolis, Minnesota.
- An unincorporated community in El Dorado County, California.
- A village in Hamilton County, Nebraska.
- plural of Phillip
- A town in Franklin County, Maine.
- A ghost town in Hutchinson County, Texas.
- A city, the county seat of Price County, Wisconsin.
- A small town in Coal County, Oklahoma.
noun
- a hand tool for driving screws; has a tip that fits into the head of a screw
- A hand tool or power tool which engages with the head of a screw and allows torque to be applied to turn the screw, thus driving it in or loosening it.
- a cocktail made with vodka and orange juice
- A cocktail made of vodka and orange juice.
noun
- screw designed to be turned with the thumb and fingers
- A screw that is designed to be turned with the thumb and fingers, thus requiring no screwdriver or spanner (wrench).
- instrument of torture that crushes the thumb
- An instrument of torture used to crush the fingers.
- (figuratively) A weakness that can be taken advantage of.
noun
- A screwdriver, a nutdriver, or a bit for such a tool; such bits include nutsetters.
- (chiefly in the plural) A driving wheel of a locomotive.
- A mallet.
- A person who drives livestock: a drover.
- A tamping iron.
- Something that drives something else.
- (aviation, slang) A pilot (person who flies aircraft).
- (audio) A device that converts an electrical signal to sound waves; the principal component of loudspeakers and headphones.
- A cooper's hammer for driving on barrel hoops.
- (engineering) Any driving element in any mechanism, which drives the driven element.
- A person who drives a motorized vehicle such as a car, truck, bus, train, forklift, etc.
- (golf) A golf club used to drive the ball a great distance.
- (nautical) A kind of sail, smaller than a fore and aft spanker on a square-rigged ship, a driver is tied to the same spars.
- One who drives something.
- A factor contributing to something; a cause.
- (computing) A device driver; a program that acts as an interface between an application and hardware, written specifically for the device it controls.
- (computer science) a program that determines how a computer will communicate with a peripheral device
- the operator of a motor vehicle
- a golfer who hits the golf ball with a driver
- a golf club (a wood) with a near vertical face that is used for hitting long shots from the tee
- someone who drives animals that pull a vehicle
noun
- A tightening screw on the back of a hand tool.
- (ping-pong) A half-volley executed by holding the racket loosely and swinging it straight at the ball.
- A hook-shapped attachment for an earring that sits behind the earlobe and tightens with a screw. Also, an earring that uses this type of attachment.
- An industrial digging machine that uses a large screw at the back to drill into the ground.
- A type of case for a pocket watch where the mechanism is accessed by a removable back plate that screws onto the back of the case. Also, a watch that has such a case.
- (golf) A powerful shot that imparts a spin to the ball.
- The period of screw rotation during injection molding when the plastic can flow into the mold.
- A type of propeller in which the blades are angled to produce a motion similar to threading a screw. Also, the angle of the blades on such a propeller.
- A mechanism for attaching a small item to clothing that operates by a post which goes through the cloth and a small backing plate that screws to the post. Also, the medal, tie pin, button, etc. that uses this type of attachment.
- (snooker, pool, billiards) The effect of putting backspin on the cue ball.
- (architecture) A masonry abutment on an arch that is wedge-shaped in order to transmit the thrust downward.
noun
- Any screw used to hold or adjust a setting, via fixation in a certain location or position: frequently a headless one, but may also be any other machine screw or thumb screw used for the purpose of setting.
- A headless screw with threads along the entire length. Typically, such screws have a hex or slot drive recessed in the threaded length.
- (New Zealand) A screw with a head, usually hexagonal, like a bolt but without a shank to allow it to screw into material rather than take a nut; a tap bolt.
verb
- To cut an external screw thread into (a bolt or rod) to create a screw.
- To put (a screw or other object) in or through another thing.
- (poker) To force (an opponent) to place all their poker chips in the pot (that is, to go all in) by wagering all of one's own chips.
- (informal) To ask or beg for (something) to be given for free; to cadge, to scrounge; also, to ask or beg (someone) to give something for free.
- To draw off (a liquid) from a container or other source; also, to draw off a liquid from (a container or other source).
- (medicine, informal) To drain off fluid from (a person or a body cavity) by paracentesis.
- (chiefly US, informal) To choose or designate (someone) for a duty, an honour, membership of an organization, or a position.
- (slang) To shoot (someone or something) with a firearm.
- (slang, vulgar) To have sexual intercourse with (someone).
- (combat sports) To submit to an opponent, chiefly by indicating an intention to do so by striking a hand on the ground several times; to tap out.
- Often followed by at or on: to strike lightly with a clear sound; also, to make a sharp noise through this action.
- (communication, chiefly law enforcement) To connect a listening and/or recording device to (a communication cable or device) in order to listen in secretly on telephone calls or other communications; also, to secretly listen in on and/or record (a telephone call or other communication).
- (transitive) To lightly touch a touchscreen, usually an icon or button, to activate a function.
- Of a bell, a drum, etc.: to make a sharp noise, often as a signal.
- (slang) Also in the form tap on the shoulder: to arrest (someone).
- To break into or open up (a thing) so as to obtain something; to exploit, to penetrate; tap into.
- To furnish (a container, etc.) with a tap (noun etymology 1 sense 2.2) so that liquid can be drawn.
- To click on something, usually a device.
- (graphical user interface) To invoke a function on an electronic device such as a mobile phone by touching (a button, icon, or specific location on its touch screen).
- To strike (someone or something), chiefly lightly with a clear sound, but sometimes hard.
- To walk by striking the ground lightly with a clear sound.
- (combat sports) To force (an opponent) to submit, chiefly by indicating their intention to do so by striking a hand on the ground several times; to tap out.
- (British, dialectal or US) To repair (an item of footwear) by putting on a new heel or sole, or a piece of material on to the heel or sole.
- To (lightly) touch (a finger, foot, or other body part) on a surface, often repeatedly.
- To deplete (something); to tap out.
- To act as a tapster; to draw an alcoholic beverage from a container.
- (horticulture) To remove a taproot from (a plant).
- (board games, card games) To turn over (a playing card or playing piece) to remind players that it has already been used in that round.
- To cut an internal screw thread in (a hole); also, to cut (an internal screw thread) in a hole, or to create an internally threaded hole in (something).
- (transitive) To lightly and repeatedly touch (a person or one or more body parts) as part of various forms of psychological treatment.
- make a solicitation or entreaty for something; request urgently or persistently
- draw (liquor) from a tap
- tap a telephone or telegraph wire to get information
- cut a female screw thread with a tap
- draw from or dip into to get something
- pierce in order to draw a liquid from
- dance and make rhythmic clicking sounds by means of metal plates nailed to the sole of the dance shoes
- furnish with a tap or spout, so as to be able to draw liquid from it
- make light, repeated taps on a surface
- strike lightly
- draw from; make good use of
- walk with a tapping sound
noun
- (mechanics) A cylindrical tool used to cut an internal screw thread in a hole, with cutting edges around the lower end and an upper end to which a handle is fitted to turn the tool.
- A device used to listen in secretly on telephone calls or other communications.
- (graphical user interface) An act of touching a button, icon, or specific location on the touch screen of an electronic device such as a mobile phone to invoke a function.
- (informal, minimizer, chiefly in the negative) The smallest amount of work; a stroke of work.
- A conical peg or pin used to close and open the hole or vent in a container.
- (British) Ellipsis of taphouse or taproom (“place where alcoholic beverages are served on tap”).
- (British, electrical engineering, mechanical engineering) A connection made to an electrical or fluid conductor without breaking it; a tapping.
- (uncountable, dance) Ellipsis of tap dance.
- A secret interception of telephone calls or other communications using such a device; also, a recording of such a communication.
- (medicine, informal) A procedure that removes fluid from a body cavity; paracentesis.
- (British, dialectal or US) A piece of leather or other material fastened upon the bottom of an item of footwear when repairing the heel or sole; also (England, dialectal) the sole of an item of footwear.
- (phonetics) A single muscle contraction in vocal organs causing a consonant sound; also, the sound so made.
- (dance) One of the metal pieces attached to the sole of a tap dancer's shoe at the toe and heel to cause a tapping sound.
- A light blow or strike with a clear sound; a gentle rap; a pat; also, the sound made by such a blow or strike.
- (firearms, slang) A shot fired from a firearm.
- An object with a tapering conical form like a tap (etymology 1 sense 1); specifically, ellipsis of taproot (“long, tapering root of a plant”).
- A hollow device used to control the flow of a fluid, such as an alcoholic beverage from a cask, or a gas or liquid in a pipe.
- (finance) A situation where a borrowing government authority issues bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions.
- (India, chiefly East India) A malarial fever.
- Liquor drawn through a tap (etymology 1 sense 2.2); hence, a certain kind or quality of liquor; also (figurative, informal), a certain kind or quality of any thing.
- a light touch or stroke
- a plug for a bunghole in a cask
- the sound made by a gentle blow
- a tool for cutting female (internal) screw threads
- a gentle blow
- a faucet for drawing water from a pipe or cask
- a small metal plate that attaches to the toe or heel of a shoe (as in tap dancing)
- the act of tapping a telephone or telegraph line to get information
noun
- (engineering) A screw thread.
- (weaving) A piece of yarn, especially said of warps and wefts in a woven fabric.
- (computing) A unit of execution, lighter in weight than a process, usually sharing memory and other resources with other threads executing concurrently.
- A continuing theme that modifies the whole discourse.
- A precarious condition; something that which offers no real or otherwise perceived security.
- A cord formed by spinning or twisting together textile fibers or filaments into one or more continuous strands, typically used in needlework.
- The continuing course of life; the thread of life.
- A line of reasoning, sequence of ideas, or train of thought.
- A sequence of connections.
- (Internet) A series of posts or messages, consisting of an initial post and responses to it, generally relating to the same subject, on a newsgroup, Internet forum, or social media platform.
- The line midway between the banks of a stream.
- Any of various natural (as spiderweb, etc.) or manufactured filaments (as glass, plastic, metal, etc.).
- A slender stream of water.
- the raised helical rib going around a screw
- a fine cord of twisted fibers (of cotton or silk or wool or nylon etc.) used in sewing and weaving
- any long object resembling a thin line
- the connections that link the various parts of an event or argument together
verb
- (intransitive) Of boiling syrup: To form a threadlike stream when poured from a spoon.
- (transitive) To fix (beads, pearls, etc.) upon a thread that is passed through; to string.
- To cautiously make (one's way) through a precarious place or situation.
- (transitive) To interweave as if with thread; to intersperse.
- (transitive) To pass a thread through the eye of a needle.
- (ambitransitive) To feed (a sewing machine or otherwise a projecting or exposing mechanism, such as a projector, a camera, etc.) with film. [(usually) with up]
- (transitive, figurative) To pass through; to pierce through; to penetrate.
- (transitive) To pass (a film or tape) through a projector, recorder, etc. so as to correct its path.
- (ambitransitive) To remove (facial hair) by way of a looped thread that is tightly wound in the middle.
- (transitive) To form a screw thread on or in (a bolt, hole, etc.).
- (transitive, figurative) To make one's way through or between (a constriction or obstacles).
- pass a thread through
- to move or cause to move in a sinuous, spiral, or circular course
- thread on or as if on a string
- remove facial hair by tying a fine string around it and pulling at the string
- pass through or into
noun
verb
verb
- (transitive) To connect or assemble pieces using a screw.
- (transitive, slang) To cheat someone or ruin their chances in a game or other situation.
- (transitive) To contort.
- (ambitransitive, vulgar, slang) To have sexual intercourse with.
- (colloquial, transitive) To give up on, to abandon, delay, to not think about someone or something.
- (soccer, transitive) To miskick (a ball) by hitting it with the wrong part of the foot.
- (billiards, snooker, pool) To screw back.
- (transitive) To extort or practice extortion upon; to oppress by unreasonable or extortionate exactions; to put the screws on.
- (colloquial, transitive, imperative, mildly vulgar) Used to express great displeasure with, or contemptuous dismissal of, someone or something.
- cause to penetrate, as with a circular motion
- have sexual intercourse with
- defeat someone through trickery or deceit
- tighten or fasten by means of screwing motions
- turn like a screw
noun
- (vulgar, slang) A casual sexual partner.
- (nautical) A ship's propeller.
- A (usually) metal fastener consisting of a partially or completely threaded shank, sometimes with a threaded point, and a head used to both hold the top material and to drive the screw either directly into a soft material or into a prepared hole.
- An Archimedes screw.
- (informal, in the plural, with "the") Rheumatism.
- (vulgar, slang) Sexual intercourse; the act of screwing.
- (mathematics) A straight line in space with which a definite linear magnitude termed the pitch is associated. It is used to express the displacement of a rigid body, which may always be made to consist of a rotation about an axis combined with a translation parallel to that axis.
- (slang, derogatory) A prison guard.
- (snooker, billiards) Backspin.
- (slang, derogatory) An extortioner; a sharp bargainer; a skinflint.
- An amphipod crustacean.
- A simple machine, a helical inclined plane.
- A steam vessel propelled by a screw instead of wheels.
- The motion of screwing something; a turn or twist to one side.
- a simple machine of the inclined-plane type consisting of a spirally threaded cylindrical rod that engages with a similarly threaded hole
- someone who guards prisoners
- a propeller with several angled blades that rotates to push against water or air
- slang for sexual intercourse
- a fastener with a tapered threaded shank and a slotted head
verb
- (transitive) To tighten or secure with screws.
- (intransitive, colloquial) To blunder; to make a mistake.
- (transitive, colloquial) To make a mess of; to ruin.
- (transitive) To raise by turning a rotary handle.
- (transitive) To raise or summon up.
- (transitive) To twist into a contorted state.
- (transitive) To raise (rent, fees, etc.) to extortionate levels.
- make more intense
- make a mess of, destroy or ruin
- twist into a strained configuration
- screw or turn higher
noun
- a cutting tool that is fitted into a diestock and used for cutting male (external) screw threads on screws or bolts or pipes or rods
- a small cube with 1 to 6 spots on the six faces; used in gambling to generate random numbers
- a device used for shaping metal
- (semiconductors, plural also dice) An oblong chip fractured from a semiconductor wafer engineered to perform as an independent device or integrated circuit.
- A device used to cut an external screw thread. (Internal screw threads are cut with a tap.)
- A mold for forming metal or plastic objects.
- An embossed device used in stamping coins and medals.
- An isohedral polyhedron, usually a cube, with numbers or symbols on each side and thrown in games of chance.
- The cubical part of a pedestal; a plinth.
- A device for cutting into a specified shape.
- Any small cubical or square body.
verb
- be brought to or as if to the point of death by an intense emotion such as embarrassment, amusement, or shame
- lose sparkle or bouquet
- pass from physical life and lose all bodily attributes and functions necessary to sustain life
- suffer or face the pain of death
- suffer spiritual death; be damned (in the religious sense)
- stop operating or functioning
- languish as with love or desire
- feel indifferent towards
- disappear or come to an end
- to be on base at the end of an inning, of a player
- cut or shape with a die
- followed by of as an indication of direct cause; general use:
- (intransitive) To stop living; to become dead; to undergo death.
- (intransitive, of a machine) To stop working; to break down or otherwise lose "vitality".
- (intransitive, figuratively) To yearn intensely.
- (intransitive, uncommon, idiomatic) To be or become hated or utterly ignored or cut off, as if dead.
- (intransitive, colloquial, hyperbolic) To be mortified or shocked by a situation.
- (video games, slang) To lose or be eliminated from a game, particularly with a deathlike animation.
- (intransitive, figuratively) To become spiritually dead; to lose hope.
- (in bare form) to die in a certain form.
- To sink; to faint; to pine; to languish, with weakness, discouragement, love, etc.
- To become vapid, flat, or spiritless, as liquor.
- (now sometimes proscribed) followed by to as an indication of direct cause (like from):
- (still current) followed by with as an indication of manner:
- (transitive) To (stop living and) undergo (a specified death).
- (intransitive, of a legislative bill or resolution) To expire at the end of the session of a legislature without having been brought to a vote.
- (intransitive, figurative, hyperbolic) To be so overcome with emotion or laughter as to be incapacitated.
- followed by for; often expressing wider contextual motivations, though sometimes indicating direct causes:
- (of a stand-up comedian or a joke, slang) To fail to evoke laughter from the audience.
- (often with "to") To become indifferent; to cease to be subject.
- followed by from as an indication of direct cause; general use, though somewhat more common in the context of medicine or the sciences:
- (intransitive, of a computer program) To abort, to terminate (as an error condition).
- (architecture) To disappear gradually in another surface, as where mouldings are lost in a sloped or curved face.
- To perish; to cease to exist; to become lost or extinct.
adv
noun
noun
name
- A township in White County, Illinois.
- A surname originating as a patronymic derived from Philip.
- A community in Minneapolis, Minnesota.
- An unincorporated community in El Dorado County, California.
- A village in Hamilton County, Nebraska.
- plural of Phillip
- A town in Franklin County, Maine.
- A ghost town in Hutchinson County, Texas.
- A city, the county seat of Price County, Wisconsin.
- A small town in Coal County, Oklahoma.
noun
- a hand tool for driving screws; has a tip that fits into the head of a screw
- A hand tool or power tool which engages with the head of a screw and allows torque to be applied to turn the screw, thus driving it in or loosening it.
- a cocktail made with vodka and orange juice
- A cocktail made of vodka and orange juice.
noun
- screw designed to be turned with the thumb and fingers
- A screw that is designed to be turned with the thumb and fingers, thus requiring no screwdriver or spanner (wrench).
- instrument of torture that crushes the thumb
- An instrument of torture used to crush the fingers.
- (figuratively) A weakness that can be taken advantage of.
noun
- A screwdriver, a nutdriver, or a bit for such a tool; such bits include nutsetters.
- (chiefly in the plural) A driving wheel of a locomotive.
- A mallet.
- A person who drives livestock: a drover.
- A tamping iron.
- Something that drives something else.
- (aviation, slang) A pilot (person who flies aircraft).
- (audio) A device that converts an electrical signal to sound waves; the principal component of loudspeakers and headphones.
- A cooper's hammer for driving on barrel hoops.
- (engineering) Any driving element in any mechanism, which drives the driven element.
- A person who drives a motorized vehicle such as a car, truck, bus, train, forklift, etc.
- (golf) A golf club used to drive the ball a great distance.
- (nautical) A kind of sail, smaller than a fore and aft spanker on a square-rigged ship, a driver is tied to the same spars.
- One who drives something.
- A factor contributing to something; a cause.
- (computing) A device driver; a program that acts as an interface between an application and hardware, written specifically for the device it controls.
- (computer science) a program that determines how a computer will communicate with a peripheral device
- the operator of a motor vehicle
- a golfer who hits the golf ball with a driver
- a golf club (a wood) with a near vertical face that is used for hitting long shots from the tee
- someone who drives animals that pull a vehicle
noun
- A tightening screw on the back of a hand tool.
- (ping-pong) A half-volley executed by holding the racket loosely and swinging it straight at the ball.
- A hook-shapped attachment for an earring that sits behind the earlobe and tightens with a screw. Also, an earring that uses this type of attachment.
- An industrial digging machine that uses a large screw at the back to drill into the ground.
- A type of case for a pocket watch where the mechanism is accessed by a removable back plate that screws onto the back of the case. Also, a watch that has such a case.
- (golf) A powerful shot that imparts a spin to the ball.
- The period of screw rotation during injection molding when the plastic can flow into the mold.
- A type of propeller in which the blades are angled to produce a motion similar to threading a screw. Also, the angle of the blades on such a propeller.
- A mechanism for attaching a small item to clothing that operates by a post which goes through the cloth and a small backing plate that screws to the post. Also, the medal, tie pin, button, etc. that uses this type of attachment.
- (snooker, pool, billiards) The effect of putting backspin on the cue ball.
- (architecture) A masonry abutment on an arch that is wedge-shaped in order to transmit the thrust downward.
noun
- Any screw used to hold or adjust a setting, via fixation in a certain location or position: frequently a headless one, but may also be any other machine screw or thumb screw used for the purpose of setting.
- A headless screw with threads along the entire length. Typically, such screws have a hex or slot drive recessed in the threaded length.
- (New Zealand) A screw with a head, usually hexagonal, like a bolt but without a shank to allow it to screw into material rather than take a nut; a tap bolt.
noun
- (engineering) A screw thread.
- (weaving) A piece of yarn, especially said of warps and wefts in a woven fabric.
- (computing) A unit of execution, lighter in weight than a process, usually sharing memory and other resources with other threads executing concurrently.
- A continuing theme that modifies the whole discourse.
- A precarious condition; something that which offers no real or otherwise perceived security.
- A cord formed by spinning or twisting together textile fibers or filaments into one or more continuous strands, typically used in needlework.
- The continuing course of life; the thread of life.
- A line of reasoning, sequence of ideas, or train of thought.
- A sequence of connections.
- (Internet) A series of posts or messages, consisting of an initial post and responses to it, generally relating to the same subject, on a newsgroup, Internet forum, or social media platform.
- The line midway between the banks of a stream.
- Any of various natural (as spiderweb, etc.) or manufactured filaments (as glass, plastic, metal, etc.).
- A slender stream of water.
- the raised helical rib going around a screw
- a fine cord of twisted fibers (of cotton or silk or wool or nylon etc.) used in sewing and weaving
- any long object resembling a thin line
- the connections that link the various parts of an event or argument together
verb
- (intransitive) Of boiling syrup: To form a threadlike stream when poured from a spoon.
- (transitive) To fix (beads, pearls, etc.) upon a thread that is passed through; to string.
- To cautiously make (one's way) through a precarious place or situation.
- (transitive) To interweave as if with thread; to intersperse.
- (transitive) To pass a thread through the eye of a needle.
- (ambitransitive) To feed (a sewing machine or otherwise a projecting or exposing mechanism, such as a projector, a camera, etc.) with film. [(usually) with up]
- (transitive, figurative) To pass through; to pierce through; to penetrate.
- (transitive) To pass (a film or tape) through a projector, recorder, etc. so as to correct its path.
- (ambitransitive) To remove (facial hair) by way of a looped thread that is tightly wound in the middle.
- (transitive) To form a screw thread on or in (a bolt, hole, etc.).
- (transitive, figurative) To make one's way through or between (a constriction or obstacles).
- pass a thread through
- to move or cause to move in a sinuous, spiral, or circular course
- thread on or as if on a string
- remove facial hair by tying a fine string around it and pulling at the string
- pass through or into
noun
verb
noun
- a cutting tool that is fitted into a diestock and used for cutting male (external) screw threads on screws or bolts or pipes or rods
- a small cube with 1 to 6 spots on the six faces; used in gambling to generate random numbers
- a device used for shaping metal
- (semiconductors, plural also dice) An oblong chip fractured from a semiconductor wafer engineered to perform as an independent device or integrated circuit.
- A device used to cut an external screw thread. (Internal screw threads are cut with a tap.)
- A mold for forming metal or plastic objects.
- An embossed device used in stamping coins and medals.
- An isohedral polyhedron, usually a cube, with numbers or symbols on each side and thrown in games of chance.
- The cubical part of a pedestal; a plinth.
- A device for cutting into a specified shape.
- Any small cubical or square body.
verb
- be brought to or as if to the point of death by an intense emotion such as embarrassment, amusement, or shame
- lose sparkle or bouquet
- pass from physical life and lose all bodily attributes and functions necessary to sustain life
- suffer or face the pain of death
- suffer spiritual death; be damned (in the religious sense)
- stop operating or functioning
- languish as with love or desire
- feel indifferent towards
- disappear or come to an end
- to be on base at the end of an inning, of a player
- cut or shape with a die
- followed by of as an indication of direct cause; general use:
- (intransitive) To stop living; to become dead; to undergo death.
- (intransitive, of a machine) To stop working; to break down or otherwise lose "vitality".
- (intransitive, figuratively) To yearn intensely.
- (intransitive, uncommon, idiomatic) To be or become hated or utterly ignored or cut off, as if dead.
- (intransitive, colloquial, hyperbolic) To be mortified or shocked by a situation.
- (video games, slang) To lose or be eliminated from a game, particularly with a deathlike animation.
- (intransitive, figuratively) To become spiritually dead; to lose hope.
- (in bare form) to die in a certain form.
- To sink; to faint; to pine; to languish, with weakness, discouragement, love, etc.
- To become vapid, flat, or spiritless, as liquor.
- (now sometimes proscribed) followed by to as an indication of direct cause (like from):
- (still current) followed by with as an indication of manner:
- (transitive) To (stop living and) undergo (a specified death).
- (intransitive, of a legislative bill or resolution) To expire at the end of the session of a legislature without having been brought to a vote.
- (intransitive, figurative, hyperbolic) To be so overcome with emotion or laughter as to be incapacitated.
- followed by for; often expressing wider contextual motivations, though sometimes indicating direct causes:
- (of a stand-up comedian or a joke, slang) To fail to evoke laughter from the audience.
- (often with "to") To become indifferent; to cease to be subject.
- followed by from as an indication of direct cause; general use, though somewhat more common in the context of medicine or the sciences:
- (intransitive, of a computer program) To abort, to terminate (as an error condition).
- (architecture) To disappear gradually in another surface, as where mouldings are lost in a sloped or curved face.
- To perish; to cease to exist; to become lost or extinct.
adv
verb
- To cut an external screw thread into (a bolt or rod) to create a screw.
- To put (a screw or other object) in or through another thing.
- (poker) To force (an opponent) to place all their poker chips in the pot (that is, to go all in) by wagering all of one's own chips.
- (informal) To ask or beg for (something) to be given for free; to cadge, to scrounge; also, to ask or beg (someone) to give something for free.
- To draw off (a liquid) from a container or other source; also, to draw off a liquid from (a container or other source).
- (medicine, informal) To drain off fluid from (a person or a body cavity) by paracentesis.
- (chiefly US, informal) To choose or designate (someone) for a duty, an honour, membership of an organization, or a position.
- (slang) To shoot (someone or something) with a firearm.
- (slang, vulgar) To have sexual intercourse with (someone).
- (combat sports) To submit to an opponent, chiefly by indicating an intention to do so by striking a hand on the ground several times; to tap out.
- Often followed by at or on: to strike lightly with a clear sound; also, to make a sharp noise through this action.
- (communication, chiefly law enforcement) To connect a listening and/or recording device to (a communication cable or device) in order to listen in secretly on telephone calls or other communications; also, to secretly listen in on and/or record (a telephone call or other communication).
- (transitive) To lightly touch a touchscreen, usually an icon or button, to activate a function.
- Of a bell, a drum, etc.: to make a sharp noise, often as a signal.
- (slang) Also in the form tap on the shoulder: to arrest (someone).
- To break into or open up (a thing) so as to obtain something; to exploit, to penetrate; tap into.
- To furnish (a container, etc.) with a tap (noun etymology 1 sense 2.2) so that liquid can be drawn.
- To click on something, usually a device.
- (graphical user interface) To invoke a function on an electronic device such as a mobile phone by touching (a button, icon, or specific location on its touch screen).
- To strike (someone or something), chiefly lightly with a clear sound, but sometimes hard.
- To walk by striking the ground lightly with a clear sound.
- (combat sports) To force (an opponent) to submit, chiefly by indicating their intention to do so by striking a hand on the ground several times; to tap out.
- (British, dialectal or US) To repair (an item of footwear) by putting on a new heel or sole, or a piece of material on to the heel or sole.
- To (lightly) touch (a finger, foot, or other body part) on a surface, often repeatedly.
- To deplete (something); to tap out.
- To act as a tapster; to draw an alcoholic beverage from a container.
- (horticulture) To remove a taproot from (a plant).
- (board games, card games) To turn over (a playing card or playing piece) to remind players that it has already been used in that round.
- To cut an internal screw thread in (a hole); also, to cut (an internal screw thread) in a hole, or to create an internally threaded hole in (something).
- (transitive) To lightly and repeatedly touch (a person or one or more body parts) as part of various forms of psychological treatment.
- make a solicitation or entreaty for something; request urgently or persistently
- draw (liquor) from a tap
- tap a telephone or telegraph wire to get information
- cut a female screw thread with a tap
- draw from or dip into to get something
- pierce in order to draw a liquid from
- dance and make rhythmic clicking sounds by means of metal plates nailed to the sole of the dance shoes
- furnish with a tap or spout, so as to be able to draw liquid from it
- make light, repeated taps on a surface
- strike lightly
- draw from; make good use of
- walk with a tapping sound
noun
- (mechanics) A cylindrical tool used to cut an internal screw thread in a hole, with cutting edges around the lower end and an upper end to which a handle is fitted to turn the tool.
- A device used to listen in secretly on telephone calls or other communications.
- (graphical user interface) An act of touching a button, icon, or specific location on the touch screen of an electronic device such as a mobile phone to invoke a function.
- (informal, minimizer, chiefly in the negative) The smallest amount of work; a stroke of work.
- A conical peg or pin used to close and open the hole or vent in a container.
- (British) Ellipsis of taphouse or taproom (“place where alcoholic beverages are served on tap”).
- (British, electrical engineering, mechanical engineering) A connection made to an electrical or fluid conductor without breaking it; a tapping.
- (uncountable, dance) Ellipsis of tap dance.
- A secret interception of telephone calls or other communications using such a device; also, a recording of such a communication.
- (medicine, informal) A procedure that removes fluid from a body cavity; paracentesis.
- (British, dialectal or US) A piece of leather or other material fastened upon the bottom of an item of footwear when repairing the heel or sole; also (England, dialectal) the sole of an item of footwear.
- (phonetics) A single muscle contraction in vocal organs causing a consonant sound; also, the sound so made.
- (dance) One of the metal pieces attached to the sole of a tap dancer's shoe at the toe and heel to cause a tapping sound.
- A light blow or strike with a clear sound; a gentle rap; a pat; also, the sound made by such a blow or strike.
- (firearms, slang) A shot fired from a firearm.
- An object with a tapering conical form like a tap (etymology 1 sense 1); specifically, ellipsis of taproot (“long, tapering root of a plant”).
- A hollow device used to control the flow of a fluid, such as an alcoholic beverage from a cask, or a gas or liquid in a pipe.
- (finance) A situation where a borrowing government authority issues bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions.
- (India, chiefly East India) A malarial fever.
- Liquor drawn through a tap (etymology 1 sense 2.2); hence, a certain kind or quality of liquor; also (figurative, informal), a certain kind or quality of any thing.
- a light touch or stroke
- a plug for a bunghole in a cask
- the sound made by a gentle blow
- a tool for cutting female (internal) screw threads
- a gentle blow
- a faucet for drawing water from a pipe or cask
- a small metal plate that attaches to the toe or heel of a shoe (as in tap dancing)
- the act of tapping a telephone or telegraph line to get information
verb
- To cut an external screw thread into (a bolt or rod) to create a screw.
- To put (a screw or other object) in or through another thing.
- (poker) To force (an opponent) to place all their poker chips in the pot (that is, to go all in) by wagering all of one's own chips.
- (informal) To ask or beg for (something) to be given for free; to cadge, to scrounge; also, to ask or beg (someone) to give something for free.
- To draw off (a liquid) from a container or other source; also, to draw off a liquid from (a container or other source).
- (medicine, informal) To drain off fluid from (a person or a body cavity) by paracentesis.
- (chiefly US, informal) To choose or designate (someone) for a duty, an honour, membership of an organization, or a position.
- (slang) To shoot (someone or something) with a firearm.
- (slang, vulgar) To have sexual intercourse with (someone).
- (combat sports) To submit to an opponent, chiefly by indicating an intention to do so by striking a hand on the ground several times; to tap out.
- Often followed by at or on: to strike lightly with a clear sound; also, to make a sharp noise through this action.
- (communication, chiefly law enforcement) To connect a listening and/or recording device to (a communication cable or device) in order to listen in secretly on telephone calls or other communications; also, to secretly listen in on and/or record (a telephone call or other communication).
- (transitive) To lightly touch a touchscreen, usually an icon or button, to activate a function.
- Of a bell, a drum, etc.: to make a sharp noise, often as a signal.
- (slang) Also in the form tap on the shoulder: to arrest (someone).
- To break into or open up (a thing) so as to obtain something; to exploit, to penetrate; tap into.
- To furnish (a container, etc.) with a tap (noun etymology 1 sense 2.2) so that liquid can be drawn.
- To click on something, usually a device.
- (graphical user interface) To invoke a function on an electronic device such as a mobile phone by touching (a button, icon, or specific location on its touch screen).
- To strike (someone or something), chiefly lightly with a clear sound, but sometimes hard.
- To walk by striking the ground lightly with a clear sound.
- (combat sports) To force (an opponent) to submit, chiefly by indicating their intention to do so by striking a hand on the ground several times; to tap out.
- (British, dialectal or US) To repair (an item of footwear) by putting on a new heel or sole, or a piece of material on to the heel or sole.
- To (lightly) touch (a finger, foot, or other body part) on a surface, often repeatedly.
- To deplete (something); to tap out.
- To act as a tapster; to draw an alcoholic beverage from a container.
- (horticulture) To remove a taproot from (a plant).
- (board games, card games) To turn over (a playing card or playing piece) to remind players that it has already been used in that round.
- To cut an internal screw thread in (a hole); also, to cut (an internal screw thread) in a hole, or to create an internally threaded hole in (something).
- (transitive) To lightly and repeatedly touch (a person or one or more body parts) as part of various forms of psychological treatment.
- make a solicitation or entreaty for something; request urgently or persistently
- draw (liquor) from a tap
- tap a telephone or telegraph wire to get information
- cut a female screw thread with a tap
- draw from or dip into to get something
- pierce in order to draw a liquid from
- dance and make rhythmic clicking sounds by means of metal plates nailed to the sole of the dance shoes
- furnish with a tap or spout, so as to be able to draw liquid from it
- make light, repeated taps on a surface
- strike lightly
- draw from; make good use of
- walk with a tapping sound
noun
- (mechanics) A cylindrical tool used to cut an internal screw thread in a hole, with cutting edges around the lower end and an upper end to which a handle is fitted to turn the tool.
- A device used to listen in secretly on telephone calls or other communications.
- (graphical user interface) An act of touching a button, icon, or specific location on the touch screen of an electronic device such as a mobile phone to invoke a function.
- (informal, minimizer, chiefly in the negative) The smallest amount of work; a stroke of work.
- A conical peg or pin used to close and open the hole or vent in a container.
- (British) Ellipsis of taphouse or taproom (“place where alcoholic beverages are served on tap”).
- (British, electrical engineering, mechanical engineering) A connection made to an electrical or fluid conductor without breaking it; a tapping.
- (uncountable, dance) Ellipsis of tap dance.
- A secret interception of telephone calls or other communications using such a device; also, a recording of such a communication.
- (medicine, informal) A procedure that removes fluid from a body cavity; paracentesis.
- (British, dialectal or US) A piece of leather or other material fastened upon the bottom of an item of footwear when repairing the heel or sole; also (England, dialectal) the sole of an item of footwear.
- (phonetics) A single muscle contraction in vocal organs causing a consonant sound; also, the sound so made.
- (dance) One of the metal pieces attached to the sole of a tap dancer's shoe at the toe and heel to cause a tapping sound.
- A light blow or strike with a clear sound; a gentle rap; a pat; also, the sound made by such a blow or strike.
- (firearms, slang) A shot fired from a firearm.
- An object with a tapering conical form like a tap (etymology 1 sense 1); specifically, ellipsis of taproot (“long, tapering root of a plant”).
- A hollow device used to control the flow of a fluid, such as an alcoholic beverage from a cask, or a gas or liquid in a pipe.
- (finance) A situation where a borrowing government authority issues bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions.
- (India, chiefly East India) A malarial fever.
- Liquor drawn through a tap (etymology 1 sense 2.2); hence, a certain kind or quality of liquor; also (figurative, informal), a certain kind or quality of any thing.
- a light touch or stroke
- a plug for a bunghole in a cask
- the sound made by a gentle blow
- a tool for cutting female (internal) screw threads
- a gentle blow
- a faucet for drawing water from a pipe or cask
- a small metal plate that attaches to the toe or heel of a shoe (as in tap dancing)
- the act of tapping a telephone or telegraph line to get information
verb
- (transitive) To connect or assemble pieces using a screw.
- (transitive, slang) To cheat someone or ruin their chances in a game or other situation.
- (transitive) To contort.
- (ambitransitive, vulgar, slang) To have sexual intercourse with.
- (colloquial, transitive) To give up on, to abandon, delay, to not think about someone or something.
- (soccer, transitive) To miskick (a ball) by hitting it with the wrong part of the foot.
- (billiards, snooker, pool) To screw back.
- (transitive) To extort or practice extortion upon; to oppress by unreasonable or extortionate exactions; to put the screws on.
- (colloquial, transitive, imperative, mildly vulgar) Used to express great displeasure with, or contemptuous dismissal of, someone or something.
- cause to penetrate, as with a circular motion
- have sexual intercourse with
- defeat someone through trickery or deceit
- tighten or fasten by means of screwing motions
- turn like a screw
noun
- (vulgar, slang) A casual sexual partner.
- (nautical) A ship's propeller.
- A (usually) metal fastener consisting of a partially or completely threaded shank, sometimes with a threaded point, and a head used to both hold the top material and to drive the screw either directly into a soft material or into a prepared hole.
- An Archimedes screw.
- (informal, in the plural, with "the") Rheumatism.
- (vulgar, slang) Sexual intercourse; the act of screwing.
- (mathematics) A straight line in space with which a definite linear magnitude termed the pitch is associated. It is used to express the displacement of a rigid body, which may always be made to consist of a rotation about an axis combined with a translation parallel to that axis.
- (slang, derogatory) A prison guard.
- (snooker, billiards) Backspin.
- (slang, derogatory) An extortioner; a sharp bargainer; a skinflint.
- An amphipod crustacean.
- A simple machine, a helical inclined plane.
- A steam vessel propelled by a screw instead of wheels.
- The motion of screwing something; a turn or twist to one side.
- a simple machine of the inclined-plane type consisting of a spirally threaded cylindrical rod that engages with a similarly threaded hole
- someone who guards prisoners
- a propeller with several angled blades that rotates to push against water or air
- slang for sexual intercourse
- a fastener with a tapered threaded shank and a slotted head
verb
- (transitive) To tighten or secure with screws.
- (intransitive, colloquial) To blunder; to make a mistake.
- (transitive, colloquial) To make a mess of; to ruin.
- (transitive) To raise by turning a rotary handle.
- (transitive) To raise or summon up.
- (transitive) To twist into a contorted state.
- (transitive) To raise (rent, fees, etc.) to extortionate levels.
- make more intense
- make a mess of, destroy or ruin
- twist into a strained configuration
- screw or turn higher
Подходящие слова не найдены. Попробуйте более широкое описание.