English-Wörter für 'Alternative form of screwdriver.'
Oben finden Sie Wörter zu "Alternative form of screwdriver.". Bewegen Sie den Fokus oder Mauszeiger auf ein Wort, um die Definition anzuzeigen.
Suchergebnisse
noun
noun
name
- A township in White County, Illinois.
- A surname originating as a patronymic derived from Philip.
- A community in Minneapolis, Minnesota.
- An unincorporated community in El Dorado County, California.
- A village in Hamilton County, Nebraska.
- plural of Phillip
- A town in Franklin County, Maine.
- A ghost town in Hutchinson County, Texas.
- A city, the county seat of Price County, Wisconsin.
- A small town in Coal County, Oklahoma.
noun
- a hand tool for driving screws; has a tip that fits into the head of a screw
- A hand tool or power tool which engages with the head of a screw and allows torque to be applied to turn the screw, thus driving it in or loosening it.
- a cocktail made with vodka and orange juice
- A cocktail made of vodka and orange juice.
noun
- screw designed to be turned with the thumb and fingers
- A screw that is designed to be turned with the thumb and fingers, thus requiring no screwdriver or spanner (wrench).
- instrument of torture that crushes the thumb
- An instrument of torture used to crush the fingers.
- (figuratively) A weakness that can be taken advantage of.
noun
- A screwdriver, a nutdriver, or a bit for such a tool; such bits include nutsetters.
- (chiefly in the plural) A driving wheel of a locomotive.
- A mallet.
- A person who drives livestock: a drover.
- A tamping iron.
- Something that drives something else.
- (aviation, slang) A pilot (person who flies aircraft).
- (audio) A device that converts an electrical signal to sound waves; the principal component of loudspeakers and headphones.
- A cooper's hammer for driving on barrel hoops.
- (engineering) Any driving element in any mechanism, which drives the driven element.
- A person who drives a motorized vehicle such as a car, truck, bus, train, forklift, etc.
- (golf) A golf club used to drive the ball a great distance.
- (nautical) A kind of sail, smaller than a fore and aft spanker on a square-rigged ship, a driver is tied to the same spars.
- One who drives something.
- A factor contributing to something; a cause.
- (computing) A device driver; a program that acts as an interface between an application and hardware, written specifically for the device it controls.
- (computer science) a program that determines how a computer will communicate with a peripheral device
- the operator of a motor vehicle
- a golfer who hits the golf ball with a driver
- a golf club (a wood) with a near vertical face that is used for hitting long shots from the tee
- someone who drives animals that pull a vehicle
noun
- A tightening screw on the back of a hand tool.
- (ping-pong) A half-volley executed by holding the racket loosely and swinging it straight at the ball.
- A hook-shapped attachment for an earring that sits behind the earlobe and tightens with a screw. Also, an earring that uses this type of attachment.
- An industrial digging machine that uses a large screw at the back to drill into the ground.
- A type of case for a pocket watch where the mechanism is accessed by a removable back plate that screws onto the back of the case. Also, a watch that has such a case.
- (golf) A powerful shot that imparts a spin to the ball.
- The period of screw rotation during injection molding when the plastic can flow into the mold.
- A type of propeller in which the blades are angled to produce a motion similar to threading a screw. Also, the angle of the blades on such a propeller.
- A mechanism for attaching a small item to clothing that operates by a post which goes through the cloth and a small backing plate that screws to the post. Also, the medal, tie pin, button, etc. that uses this type of attachment.
- (snooker, pool, billiards) The effect of putting backspin on the cue ball.
- (architecture) A masonry abutment on an arch that is wedge-shaped in order to transmit the thrust downward.
noun
- Any screw used to hold or adjust a setting, via fixation in a certain location or position: frequently a headless one, but may also be any other machine screw or thumb screw used for the purpose of setting.
- A headless screw with threads along the entire length. Typically, such screws have a hex or slot drive recessed in the threaded length.
- (New Zealand) A screw with a head, usually hexagonal, like a bolt but without a shank to allow it to screw into material rather than take a nut; a tap bolt.
verb
- To cut an external screw thread into (a bolt or rod) to create a screw.
- To put (a screw or other object) in or through another thing.
- (poker) To force (an opponent) to place all their poker chips in the pot (that is, to go all in) by wagering all of one's own chips.
- (informal) To ask or beg for (something) to be given for free; to cadge, to scrounge; also, to ask or beg (someone) to give something for free.
- To draw off (a liquid) from a container or other source; also, to draw off a liquid from (a container or other source).
- (medicine, informal) To drain off fluid from (a person or a body cavity) by paracentesis.
- (chiefly US, informal) To choose or designate (someone) for a duty, an honour, membership of an organization, or a position.
- (slang) To shoot (someone or something) with a firearm.
- (slang, vulgar) To have sexual intercourse with (someone).
- (combat sports) To submit to an opponent, chiefly by indicating an intention to do so by striking a hand on the ground several times; to tap out.
- Often followed by at or on: to strike lightly with a clear sound; also, to make a sharp noise through this action.
- (communication, chiefly law enforcement) To connect a listening and/or recording device to (a communication cable or device) in order to listen in secretly on telephone calls or other communications; also, to secretly listen in on and/or record (a telephone call or other communication).
- (transitive) To lightly touch a touchscreen, usually an icon or button, to activate a function.
- Of a bell, a drum, etc.: to make a sharp noise, often as a signal.
- (slang) Also in the form tap on the shoulder: to arrest (someone).
- To break into or open up (a thing) so as to obtain something; to exploit, to penetrate; tap into.
- To furnish (a container, etc.) with a tap (noun etymology 1 sense 2.2) so that liquid can be drawn.
- To click on something, usually a device.
- (graphical user interface) To invoke a function on an electronic device such as a mobile phone by touching (a button, icon, or specific location on its touch screen).
- To strike (someone or something), chiefly lightly with a clear sound, but sometimes hard.
- To walk by striking the ground lightly with a clear sound.
- (combat sports) To force (an opponent) to submit, chiefly by indicating their intention to do so by striking a hand on the ground several times; to tap out.
- (British, dialectal or US) To repair (an item of footwear) by putting on a new heel or sole, or a piece of material on to the heel or sole.
- To (lightly) touch (a finger, foot, or other body part) on a surface, often repeatedly.
- To deplete (something); to tap out.
- To act as a tapster; to draw an alcoholic beverage from a container.
- (horticulture) To remove a taproot from (a plant).
- (board games, card games) To turn over (a playing card or playing piece) to remind players that it has already been used in that round.
- To cut an internal screw thread in (a hole); also, to cut (an internal screw thread) in a hole, or to create an internally threaded hole in (something).
- (transitive) To lightly and repeatedly touch (a person or one or more body parts) as part of various forms of psychological treatment.
- make a solicitation or entreaty for something; request urgently or persistently
- draw (liquor) from a tap
- tap a telephone or telegraph wire to get information
- cut a female screw thread with a tap
- draw from or dip into to get something
- pierce in order to draw a liquid from
- dance and make rhythmic clicking sounds by means of metal plates nailed to the sole of the dance shoes
- furnish with a tap or spout, so as to be able to draw liquid from it
- make light, repeated taps on a surface
- strike lightly
- draw from; make good use of
- walk with a tapping sound
noun
- (mechanics) A cylindrical tool used to cut an internal screw thread in a hole, with cutting edges around the lower end and an upper end to which a handle is fitted to turn the tool.
- A device used to listen in secretly on telephone calls or other communications.
- (graphical user interface) An act of touching a button, icon, or specific location on the touch screen of an electronic device such as a mobile phone to invoke a function.
- (informal, minimizer, chiefly in the negative) The smallest amount of work; a stroke of work.
- A conical peg or pin used to close and open the hole or vent in a container.
- (British) Ellipsis of taphouse or taproom (“place where alcoholic beverages are served on tap”).
- (British, electrical engineering, mechanical engineering) A connection made to an electrical or fluid conductor without breaking it; a tapping.
- (uncountable, dance) Ellipsis of tap dance.
- A secret interception of telephone calls or other communications using such a device; also, a recording of such a communication.
- (medicine, informal) A procedure that removes fluid from a body cavity; paracentesis.
- (British, dialectal or US) A piece of leather or other material fastened upon the bottom of an item of footwear when repairing the heel or sole; also (England, dialectal) the sole of an item of footwear.
- (phonetics) A single muscle contraction in vocal organs causing a consonant sound; also, the sound so made.
- (dance) One of the metal pieces attached to the sole of a tap dancer's shoe at the toe and heel to cause a tapping sound.
- A light blow or strike with a clear sound; a gentle rap; a pat; also, the sound made by such a blow or strike.
- (firearms, slang) A shot fired from a firearm.
- An object with a tapering conical form like a tap (etymology 1 sense 1); specifically, ellipsis of taproot (“long, tapering root of a plant”).
- A hollow device used to control the flow of a fluid, such as an alcoholic beverage from a cask, or a gas or liquid in a pipe.
- (finance) A situation where a borrowing government authority issues bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions.
- (India, chiefly East India) A malarial fever.
- Liquor drawn through a tap (etymology 1 sense 2.2); hence, a certain kind or quality of liquor; also (figurative, informal), a certain kind or quality of any thing.
- a light touch or stroke
- a plug for a bunghole in a cask
- the sound made by a gentle blow
- a tool for cutting female (internal) screw threads
- a gentle blow
- a faucet for drawing water from a pipe or cask
- a small metal plate that attaches to the toe or heel of a shoe (as in tap dancing)
- the act of tapping a telephone or telegraph line to get information
noun
- (engineering) A screw thread.
- (weaving) A piece of yarn, especially said of warps and wefts in a woven fabric.
- (computing) A unit of execution, lighter in weight than a process, usually sharing memory and other resources with other threads executing concurrently.
- A continuing theme that modifies the whole discourse.
- A precarious condition; something that which offers no real or otherwise perceived security.
- A cord formed by spinning or twisting together textile fibers or filaments into one or more continuous strands, typically used in needlework.
- The continuing course of life; the thread of life.
- A line of reasoning, sequence of ideas, or train of thought.
- A sequence of connections.
- (Internet) A series of posts or messages, consisting of an initial post and responses to it, generally relating to the same subject, on a newsgroup, Internet forum, or social media platform.
- The line midway between the banks of a stream.
- Any of various natural (as spiderweb, etc.) or manufactured filaments (as glass, plastic, metal, etc.).
- A slender stream of water.
- the raised helical rib going around a screw
- a fine cord of twisted fibers (of cotton or silk or wool or nylon etc.) used in sewing and weaving
- any long object resembling a thin line
- the connections that link the various parts of an event or argument together
verb
- (intransitive) Of boiling syrup: To form a threadlike stream when poured from a spoon.
- (transitive) To fix (beads, pearls, etc.) upon a thread that is passed through; to string.
- To cautiously make (one's way) through a precarious place or situation.
- (transitive) To interweave as if with thread; to intersperse.
- (transitive) To pass a thread through the eye of a needle.
- (ambitransitive) To feed (a sewing machine or otherwise a projecting or exposing mechanism, such as a projector, a camera, etc.) with film. [(usually) with up]
- (transitive, figurative) To pass through; to pierce through; to penetrate.
- (transitive) To pass (a film or tape) through a projector, recorder, etc. so as to correct its path.
- (ambitransitive) To remove (facial hair) by way of a looped thread that is tightly wound in the middle.
- (transitive) To form a screw thread on or in (a bolt, hole, etc.).
- (transitive, figurative) To make one's way through or between (a constriction or obstacles).
- pass a thread through
- to move or cause to move in a sinuous, spiral, or circular course
- thread on or as if on a string
- remove facial hair by tying a fine string around it and pulling at the string
- pass through or into
noun
verb
verb
- (transitive) To connect or assemble pieces using a screw.
- (transitive, slang) To cheat someone or ruin their chances in a game or other situation.
- (transitive) To contort.
- (ambitransitive, vulgar, slang) To have sexual intercourse with.
- (colloquial, transitive) To give up on, to abandon, delay, to not think about someone or something.
- (soccer, transitive) To miskick (a ball) by hitting it with the wrong part of the foot.
- (billiards, snooker, pool) To screw back.
- (transitive) To extort or practice extortion upon; to oppress by unreasonable or extortionate exactions; to put the screws on.
- (colloquial, transitive, imperative, mildly vulgar) Used to express great displeasure with, or contemptuous dismissal of, someone or something.
- cause to penetrate, as with a circular motion
- have sexual intercourse with
- defeat someone through trickery or deceit
- tighten or fasten by means of screwing motions
- turn like a screw
noun
- (vulgar, slang) A casual sexual partner.
- (nautical) A ship's propeller.
- A (usually) metal fastener consisting of a partially or completely threaded shank, sometimes with a threaded point, and a head used to both hold the top material and to drive the screw either directly into a soft material or into a prepared hole.
- An Archimedes screw.
- (informal, in the plural, with "the") Rheumatism.
- (vulgar, slang) Sexual intercourse; the act of screwing.
- (mathematics) A straight line in space with which a definite linear magnitude termed the pitch is associated. It is used to express the displacement of a rigid body, which may always be made to consist of a rotation about an axis combined with a translation parallel to that axis.
- (slang, derogatory) A prison guard.
- (snooker, billiards) Backspin.
- (slang, derogatory) An extortioner; a sharp bargainer; a skinflint.
- An amphipod crustacean.
- A simple machine, a helical inclined plane.
- A steam vessel propelled by a screw instead of wheels.
- The motion of screwing something; a turn or twist to one side.
- a simple machine of the inclined-plane type consisting of a spirally threaded cylindrical rod that engages with a similarly threaded hole
- someone who guards prisoners
- a propeller with several angled blades that rotates to push against water or air
- slang for sexual intercourse
- a fastener with a tapered threaded shank and a slotted head
verb
- (transitive) To tighten or secure with screws.
- (intransitive, colloquial) To blunder; to make a mistake.
- (transitive, colloquial) To make a mess of; to ruin.
- (transitive) To raise by turning a rotary handle.
- (transitive) To raise or summon up.
- (transitive) To twist into a contorted state.
- (transitive) To raise (rent, fees, etc.) to extortionate levels.
- make more intense
- make a mess of, destroy or ruin
- twist into a strained configuration
- screw or turn higher
noun
- a cutting tool that is fitted into a diestock and used for cutting male (external) screw threads on screws or bolts or pipes or rods
- a small cube with 1 to 6 spots on the six faces; used in gambling to generate random numbers
- a device used for shaping metal
- (semiconductors, plural also dice) An oblong chip fractured from a semiconductor wafer engineered to perform as an independent device or integrated circuit.
- A device used to cut an external screw thread. (Internal screw threads are cut with a tap.)
- A mold for forming metal or plastic objects.
- An embossed device used in stamping coins and medals.
- An isohedral polyhedron, usually a cube, with numbers or symbols on each side and thrown in games of chance.
- The cubical part of a pedestal; a plinth.
- A device for cutting into a specified shape.
- Any small cubical or square body.
verb
- be brought to or as if to the point of death by an intense emotion such as embarrassment, amusement, or shame
- lose sparkle or bouquet
- pass from physical life and lose all bodily attributes and functions necessary to sustain life
- suffer or face the pain of death
- suffer spiritual death; be damned (in the religious sense)
- stop operating or functioning
- languish as with love or desire
- feel indifferent towards
- disappear or come to an end
- to be on base at the end of an inning, of a player
- cut or shape with a die
- followed by of as an indication of direct cause; general use:
- (intransitive) To stop living; to become dead; to undergo death.
- (intransitive, of a machine) To stop working; to break down or otherwise lose "vitality".
- (intransitive, figuratively) To yearn intensely.
- (intransitive, uncommon, idiomatic) To be or become hated or utterly ignored or cut off, as if dead.
- (intransitive, colloquial, hyperbolic) To be mortified or shocked by a situation.
- (video games, slang) To lose or be eliminated from a game, particularly with a deathlike animation.
- (intransitive, figuratively) To become spiritually dead; to lose hope.
- (in bare form) to die in a certain form.
- To sink; to faint; to pine; to languish, with weakness, discouragement, love, etc.
- To become vapid, flat, or spiritless, as liquor.
- (now sometimes proscribed) followed by to as an indication of direct cause (like from):
- (still current) followed by with as an indication of manner:
- (transitive) To (stop living and) undergo (a specified death).
- (intransitive, of a legislative bill or resolution) To expire at the end of the session of a legislature without having been brought to a vote.
- (intransitive, figurative, hyperbolic) To be so overcome with emotion or laughter as to be incapacitated.
- followed by for; often expressing wider contextual motivations, though sometimes indicating direct causes:
- (of a stand-up comedian or a joke, slang) To fail to evoke laughter from the audience.
- (often with "to") To become indifferent; to cease to be subject.
- followed by from as an indication of direct cause; general use, though somewhat more common in the context of medicine or the sciences:
- (intransitive, of a computer program) To abort, to terminate (as an error condition).
- (architecture) To disappear gradually in another surface, as where mouldings are lost in a sloped or curved face.
- To perish; to cease to exist; to become lost or extinct.
adv
noun
noun
name
- A township in White County, Illinois.
- A surname originating as a patronymic derived from Philip.
- A community in Minneapolis, Minnesota.
- An unincorporated community in El Dorado County, California.
- A village in Hamilton County, Nebraska.
- plural of Phillip
- A town in Franklin County, Maine.
- A ghost town in Hutchinson County, Texas.
- A city, the county seat of Price County, Wisconsin.
- A small town in Coal County, Oklahoma.
noun
- a hand tool for driving screws; has a tip that fits into the head of a screw
- A hand tool or power tool which engages with the head of a screw and allows torque to be applied to turn the screw, thus driving it in or loosening it.
- a cocktail made with vodka and orange juice
- A cocktail made of vodka and orange juice.
noun
- screw designed to be turned with the thumb and fingers
- A screw that is designed to be turned with the thumb and fingers, thus requiring no screwdriver or spanner (wrench).
- instrument of torture that crushes the thumb
- An instrument of torture used to crush the fingers.
- (figuratively) A weakness that can be taken advantage of.
noun
- A screwdriver, a nutdriver, or a bit for such a tool; such bits include nutsetters.
- (chiefly in the plural) A driving wheel of a locomotive.
- A mallet.
- A person who drives livestock: a drover.
- A tamping iron.
- Something that drives something else.
- (aviation, slang) A pilot (person who flies aircraft).
- (audio) A device that converts an electrical signal to sound waves; the principal component of loudspeakers and headphones.
- A cooper's hammer for driving on barrel hoops.
- (engineering) Any driving element in any mechanism, which drives the driven element.
- A person who drives a motorized vehicle such as a car, truck, bus, train, forklift, etc.
- (golf) A golf club used to drive the ball a great distance.
- (nautical) A kind of sail, smaller than a fore and aft spanker on a square-rigged ship, a driver is tied to the same spars.
- One who drives something.
- A factor contributing to something; a cause.
- (computing) A device driver; a program that acts as an interface between an application and hardware, written specifically for the device it controls.
- (computer science) a program that determines how a computer will communicate with a peripheral device
- the operator of a motor vehicle
- a golfer who hits the golf ball with a driver
- a golf club (a wood) with a near vertical face that is used for hitting long shots from the tee
- someone who drives animals that pull a vehicle
noun
- A tightening screw on the back of a hand tool.
- (ping-pong) A half-volley executed by holding the racket loosely and swinging it straight at the ball.
- A hook-shapped attachment for an earring that sits behind the earlobe and tightens with a screw. Also, an earring that uses this type of attachment.
- An industrial digging machine that uses a large screw at the back to drill into the ground.
- A type of case for a pocket watch where the mechanism is accessed by a removable back plate that screws onto the back of the case. Also, a watch that has such a case.
- (golf) A powerful shot that imparts a spin to the ball.
- The period of screw rotation during injection molding when the plastic can flow into the mold.
- A type of propeller in which the blades are angled to produce a motion similar to threading a screw. Also, the angle of the blades on such a propeller.
- A mechanism for attaching a small item to clothing that operates by a post which goes through the cloth and a small backing plate that screws to the post. Also, the medal, tie pin, button, etc. that uses this type of attachment.
- (snooker, pool, billiards) The effect of putting backspin on the cue ball.
- (architecture) A masonry abutment on an arch that is wedge-shaped in order to transmit the thrust downward.
noun
- Any screw used to hold or adjust a setting, via fixation in a certain location or position: frequently a headless one, but may also be any other machine screw or thumb screw used for the purpose of setting.
- A headless screw with threads along the entire length. Typically, such screws have a hex or slot drive recessed in the threaded length.
- (New Zealand) A screw with a head, usually hexagonal, like a bolt but without a shank to allow it to screw into material rather than take a nut; a tap bolt.
noun
- (engineering) A screw thread.
- (weaving) A piece of yarn, especially said of warps and wefts in a woven fabric.
- (computing) A unit of execution, lighter in weight than a process, usually sharing memory and other resources with other threads executing concurrently.
- A continuing theme that modifies the whole discourse.
- A precarious condition; something that which offers no real or otherwise perceived security.
- A cord formed by spinning or twisting together textile fibers or filaments into one or more continuous strands, typically used in needlework.
- The continuing course of life; the thread of life.
- A line of reasoning, sequence of ideas, or train of thought.
- A sequence of connections.
- (Internet) A series of posts or messages, consisting of an initial post and responses to it, generally relating to the same subject, on a newsgroup, Internet forum, or social media platform.
- The line midway between the banks of a stream.
- Any of various natural (as spiderweb, etc.) or manufactured filaments (as glass, plastic, metal, etc.).
- A slender stream of water.
- the raised helical rib going around a screw
- a fine cord of twisted fibers (of cotton or silk or wool or nylon etc.) used in sewing and weaving
- any long object resembling a thin line
- the connections that link the various parts of an event or argument together
verb
- (intransitive) Of boiling syrup: To form a threadlike stream when poured from a spoon.
- (transitive) To fix (beads, pearls, etc.) upon a thread that is passed through; to string.
- To cautiously make (one's way) through a precarious place or situation.
- (transitive) To interweave as if with thread; to intersperse.
- (transitive) To pass a thread through the eye of a needle.
- (ambitransitive) To feed (a sewing machine or otherwise a projecting or exposing mechanism, such as a projector, a camera, etc.) with film. [(usually) with up]
- (transitive, figurative) To pass through; to pierce through; to penetrate.
- (transitive) To pass (a film or tape) through a projector, recorder, etc. so as to correct its path.
- (ambitransitive) To remove (facial hair) by way of a looped thread that is tightly wound in the middle.
- (transitive) To form a screw thread on or in (a bolt, hole, etc.).
- (transitive, figurative) To make one's way through or between (a constriction or obstacles).
- pass a thread through
- to move or cause to move in a sinuous, spiral, or circular course
- thread on or as if on a string
- remove facial hair by tying a fine string around it and pulling at the string
- pass through or into
noun
verb
noun
- a cutting tool that is fitted into a diestock and used for cutting male (external) screw threads on screws or bolts or pipes or rods
- a small cube with 1 to 6 spots on the six faces; used in gambling to generate random numbers
- a device used for shaping metal
- (semiconductors, plural also dice) An oblong chip fractured from a semiconductor wafer engineered to perform as an independent device or integrated circuit.
- A device used to cut an external screw thread. (Internal screw threads are cut with a tap.)
- A mold for forming metal or plastic objects.
- An embossed device used in stamping coins and medals.
- An isohedral polyhedron, usually a cube, with numbers or symbols on each side and thrown in games of chance.
- The cubical part of a pedestal; a plinth.
- A device for cutting into a specified shape.
- Any small cubical or square body.
verb
- be brought to or as if to the point of death by an intense emotion such as embarrassment, amusement, or shame
- lose sparkle or bouquet
- pass from physical life and lose all bodily attributes and functions necessary to sustain life
- suffer or face the pain of death
- suffer spiritual death; be damned (in the religious sense)
- stop operating or functioning
- languish as with love or desire
- feel indifferent towards
- disappear or come to an end
- to be on base at the end of an inning, of a player
- cut or shape with a die
- followed by of as an indication of direct cause; general use:
- (intransitive) To stop living; to become dead; to undergo death.
- (intransitive, of a machine) To stop working; to break down or otherwise lose "vitality".
- (intransitive, figuratively) To yearn intensely.
- (intransitive, uncommon, idiomatic) To be or become hated or utterly ignored or cut off, as if dead.
- (intransitive, colloquial, hyperbolic) To be mortified or shocked by a situation.
- (video games, slang) To lose or be eliminated from a game, particularly with a deathlike animation.
- (intransitive, figuratively) To become spiritually dead; to lose hope.
- (in bare form) to die in a certain form.
- To sink; to faint; to pine; to languish, with weakness, discouragement, love, etc.
- To become vapid, flat, or spiritless, as liquor.
- (now sometimes proscribed) followed by to as an indication of direct cause (like from):
- (still current) followed by with as an indication of manner:
- (transitive) To (stop living and) undergo (a specified death).
- (intransitive, of a legislative bill or resolution) To expire at the end of the session of a legislature without having been brought to a vote.
- (intransitive, figurative, hyperbolic) To be so overcome with emotion or laughter as to be incapacitated.
- followed by for; often expressing wider contextual motivations, though sometimes indicating direct causes:
- (of a stand-up comedian or a joke, slang) To fail to evoke laughter from the audience.
- (often with "to") To become indifferent; to cease to be subject.
- followed by from as an indication of direct cause; general use, though somewhat more common in the context of medicine or the sciences:
- (intransitive, of a computer program) To abort, to terminate (as an error condition).
- (architecture) To disappear gradually in another surface, as where mouldings are lost in a sloped or curved face.
- To perish; to cease to exist; to become lost or extinct.
adv
verb
- To cut an external screw thread into (a bolt or rod) to create a screw.
- To put (a screw or other object) in or through another thing.
- (poker) To force (an opponent) to place all their poker chips in the pot (that is, to go all in) by wagering all of one's own chips.
- (informal) To ask or beg for (something) to be given for free; to cadge, to scrounge; also, to ask or beg (someone) to give something for free.
- To draw off (a liquid) from a container or other source; also, to draw off a liquid from (a container or other source).
- (medicine, informal) To drain off fluid from (a person or a body cavity) by paracentesis.
- (chiefly US, informal) To choose or designate (someone) for a duty, an honour, membership of an organization, or a position.
- (slang) To shoot (someone or something) with a firearm.
- (slang, vulgar) To have sexual intercourse with (someone).
- (combat sports) To submit to an opponent, chiefly by indicating an intention to do so by striking a hand on the ground several times; to tap out.
- Often followed by at or on: to strike lightly with a clear sound; also, to make a sharp noise through this action.
- (communication, chiefly law enforcement) To connect a listening and/or recording device to (a communication cable or device) in order to listen in secretly on telephone calls or other communications; also, to secretly listen in on and/or record (a telephone call or other communication).
- (transitive) To lightly touch a touchscreen, usually an icon or button, to activate a function.
- Of a bell, a drum, etc.: to make a sharp noise, often as a signal.
- (slang) Also in the form tap on the shoulder: to arrest (someone).
- To break into or open up (a thing) so as to obtain something; to exploit, to penetrate; tap into.
- To furnish (a container, etc.) with a tap (noun etymology 1 sense 2.2) so that liquid can be drawn.
- To click on something, usually a device.
- (graphical user interface) To invoke a function on an electronic device such as a mobile phone by touching (a button, icon, or specific location on its touch screen).
- To strike (someone or something), chiefly lightly with a clear sound, but sometimes hard.
- To walk by striking the ground lightly with a clear sound.
- (combat sports) To force (an opponent) to submit, chiefly by indicating their intention to do so by striking a hand on the ground several times; to tap out.
- (British, dialectal or US) To repair (an item of footwear) by putting on a new heel or sole, or a piece of material on to the heel or sole.
- To (lightly) touch (a finger, foot, or other body part) on a surface, often repeatedly.
- To deplete (something); to tap out.
- To act as a tapster; to draw an alcoholic beverage from a container.
- (horticulture) To remove a taproot from (a plant).
- (board games, card games) To turn over (a playing card or playing piece) to remind players that it has already been used in that round.
- To cut an internal screw thread in (a hole); also, to cut (an internal screw thread) in a hole, or to create an internally threaded hole in (something).
- (transitive) To lightly and repeatedly touch (a person or one or more body parts) as part of various forms of psychological treatment.
- make a solicitation or entreaty for something; request urgently or persistently
- draw (liquor) from a tap
- tap a telephone or telegraph wire to get information
- cut a female screw thread with a tap
- draw from or dip into to get something
- pierce in order to draw a liquid from
- dance and make rhythmic clicking sounds by means of metal plates nailed to the sole of the dance shoes
- furnish with a tap or spout, so as to be able to draw liquid from it
- make light, repeated taps on a surface
- strike lightly
- draw from; make good use of
- walk with a tapping sound
noun
- (mechanics) A cylindrical tool used to cut an internal screw thread in a hole, with cutting edges around the lower end and an upper end to which a handle is fitted to turn the tool.
- A device used to listen in secretly on telephone calls or other communications.
- (graphical user interface) An act of touching a button, icon, or specific location on the touch screen of an electronic device such as a mobile phone to invoke a function.
- (informal, minimizer, chiefly in the negative) The smallest amount of work; a stroke of work.
- A conical peg or pin used to close and open the hole or vent in a container.
- (British) Ellipsis of taphouse or taproom (“place where alcoholic beverages are served on tap”).
- (British, electrical engineering, mechanical engineering) A connection made to an electrical or fluid conductor without breaking it; a tapping.
- (uncountable, dance) Ellipsis of tap dance.
- A secret interception of telephone calls or other communications using such a device; also, a recording of such a communication.
- (medicine, informal) A procedure that removes fluid from a body cavity; paracentesis.
- (British, dialectal or US) A piece of leather or other material fastened upon the bottom of an item of footwear when repairing the heel or sole; also (England, dialectal) the sole of an item of footwear.
- (phonetics) A single muscle contraction in vocal organs causing a consonant sound; also, the sound so made.
- (dance) One of the metal pieces attached to the sole of a tap dancer's shoe at the toe and heel to cause a tapping sound.
- A light blow or strike with a clear sound; a gentle rap; a pat; also, the sound made by such a blow or strike.
- (firearms, slang) A shot fired from a firearm.
- An object with a tapering conical form like a tap (etymology 1 sense 1); specifically, ellipsis of taproot (“long, tapering root of a plant”).
- A hollow device used to control the flow of a fluid, such as an alcoholic beverage from a cask, or a gas or liquid in a pipe.
- (finance) A situation where a borrowing government authority issues bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions.
- (India, chiefly East India) A malarial fever.
- Liquor drawn through a tap (etymology 1 sense 2.2); hence, a certain kind or quality of liquor; also (figurative, informal), a certain kind or quality of any thing.
- a light touch or stroke
- a plug for a bunghole in a cask
- the sound made by a gentle blow
- a tool for cutting female (internal) screw threads
- a gentle blow
- a faucet for drawing water from a pipe or cask
- a small metal plate that attaches to the toe or heel of a shoe (as in tap dancing)
- the act of tapping a telephone or telegraph line to get information
verb
- To cut an external screw thread into (a bolt or rod) to create a screw.
- To put (a screw or other object) in or through another thing.
- (poker) To force (an opponent) to place all their poker chips in the pot (that is, to go all in) by wagering all of one's own chips.
- (informal) To ask or beg for (something) to be given for free; to cadge, to scrounge; also, to ask or beg (someone) to give something for free.
- To draw off (a liquid) from a container or other source; also, to draw off a liquid from (a container or other source).
- (medicine, informal) To drain off fluid from (a person or a body cavity) by paracentesis.
- (chiefly US, informal) To choose or designate (someone) for a duty, an honour, membership of an organization, or a position.
- (slang) To shoot (someone or something) with a firearm.
- (slang, vulgar) To have sexual intercourse with (someone).
- (combat sports) To submit to an opponent, chiefly by indicating an intention to do so by striking a hand on the ground several times; to tap out.
- Often followed by at or on: to strike lightly with a clear sound; also, to make a sharp noise through this action.
- (communication, chiefly law enforcement) To connect a listening and/or recording device to (a communication cable or device) in order to listen in secretly on telephone calls or other communications; also, to secretly listen in on and/or record (a telephone call or other communication).
- (transitive) To lightly touch a touchscreen, usually an icon or button, to activate a function.
- Of a bell, a drum, etc.: to make a sharp noise, often as a signal.
- (slang) Also in the form tap on the shoulder: to arrest (someone).
- To break into or open up (a thing) so as to obtain something; to exploit, to penetrate; tap into.
- To furnish (a container, etc.) with a tap (noun etymology 1 sense 2.2) so that liquid can be drawn.
- To click on something, usually a device.
- (graphical user interface) To invoke a function on an electronic device such as a mobile phone by touching (a button, icon, or specific location on its touch screen).
- To strike (someone or something), chiefly lightly with a clear sound, but sometimes hard.
- To walk by striking the ground lightly with a clear sound.
- (combat sports) To force (an opponent) to submit, chiefly by indicating their intention to do so by striking a hand on the ground several times; to tap out.
- (British, dialectal or US) To repair (an item of footwear) by putting on a new heel or sole, or a piece of material on to the heel or sole.
- To (lightly) touch (a finger, foot, or other body part) on a surface, often repeatedly.
- To deplete (something); to tap out.
- To act as a tapster; to draw an alcoholic beverage from a container.
- (horticulture) To remove a taproot from (a plant).
- (board games, card games) To turn over (a playing card or playing piece) to remind players that it has already been used in that round.
- To cut an internal screw thread in (a hole); also, to cut (an internal screw thread) in a hole, or to create an internally threaded hole in (something).
- (transitive) To lightly and repeatedly touch (a person or one or more body parts) as part of various forms of psychological treatment.
- make a solicitation or entreaty for something; request urgently or persistently
- draw (liquor) from a tap
- tap a telephone or telegraph wire to get information
- cut a female screw thread with a tap
- draw from or dip into to get something
- pierce in order to draw a liquid from
- dance and make rhythmic clicking sounds by means of metal plates nailed to the sole of the dance shoes
- furnish with a tap or spout, so as to be able to draw liquid from it
- make light, repeated taps on a surface
- strike lightly
- draw from; make good use of
- walk with a tapping sound
noun
- (mechanics) A cylindrical tool used to cut an internal screw thread in a hole, with cutting edges around the lower end and an upper end to which a handle is fitted to turn the tool.
- A device used to listen in secretly on telephone calls or other communications.
- (graphical user interface) An act of touching a button, icon, or specific location on the touch screen of an electronic device such as a mobile phone to invoke a function.
- (informal, minimizer, chiefly in the negative) The smallest amount of work; a stroke of work.
- A conical peg or pin used to close and open the hole or vent in a container.
- (British) Ellipsis of taphouse or taproom (“place where alcoholic beverages are served on tap”).
- (British, electrical engineering, mechanical engineering) A connection made to an electrical or fluid conductor without breaking it; a tapping.
- (uncountable, dance) Ellipsis of tap dance.
- A secret interception of telephone calls or other communications using such a device; also, a recording of such a communication.
- (medicine, informal) A procedure that removes fluid from a body cavity; paracentesis.
- (British, dialectal or US) A piece of leather or other material fastened upon the bottom of an item of footwear when repairing the heel or sole; also (England, dialectal) the sole of an item of footwear.
- (phonetics) A single muscle contraction in vocal organs causing a consonant sound; also, the sound so made.
- (dance) One of the metal pieces attached to the sole of a tap dancer's shoe at the toe and heel to cause a tapping sound.
- A light blow or strike with a clear sound; a gentle rap; a pat; also, the sound made by such a blow or strike.
- (firearms, slang) A shot fired from a firearm.
- An object with a tapering conical form like a tap (etymology 1 sense 1); specifically, ellipsis of taproot (“long, tapering root of a plant”).
- A hollow device used to control the flow of a fluid, such as an alcoholic beverage from a cask, or a gas or liquid in a pipe.
- (finance) A situation where a borrowing government authority issues bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions.
- (India, chiefly East India) A malarial fever.
- Liquor drawn through a tap (etymology 1 sense 2.2); hence, a certain kind or quality of liquor; also (figurative, informal), a certain kind or quality of any thing.
- a light touch or stroke
- a plug for a bunghole in a cask
- the sound made by a gentle blow
- a tool for cutting female (internal) screw threads
- a gentle blow
- a faucet for drawing water from a pipe or cask
- a small metal plate that attaches to the toe or heel of a shoe (as in tap dancing)
- the act of tapping a telephone or telegraph line to get information
verb
- (transitive) To connect or assemble pieces using a screw.
- (transitive, slang) To cheat someone or ruin their chances in a game or other situation.
- (transitive) To contort.
- (ambitransitive, vulgar, slang) To have sexual intercourse with.
- (colloquial, transitive) To give up on, to abandon, delay, to not think about someone or something.
- (soccer, transitive) To miskick (a ball) by hitting it with the wrong part of the foot.
- (billiards, snooker, pool) To screw back.
- (transitive) To extort or practice extortion upon; to oppress by unreasonable or extortionate exactions; to put the screws on.
- (colloquial, transitive, imperative, mildly vulgar) Used to express great displeasure with, or contemptuous dismissal of, someone or something.
- cause to penetrate, as with a circular motion
- have sexual intercourse with
- defeat someone through trickery or deceit
- tighten or fasten by means of screwing motions
- turn like a screw
noun
- (vulgar, slang) A casual sexual partner.
- (nautical) A ship's propeller.
- A (usually) metal fastener consisting of a partially or completely threaded shank, sometimes with a threaded point, and a head used to both hold the top material and to drive the screw either directly into a soft material or into a prepared hole.
- An Archimedes screw.
- (informal, in the plural, with "the") Rheumatism.
- (vulgar, slang) Sexual intercourse; the act of screwing.
- (mathematics) A straight line in space with which a definite linear magnitude termed the pitch is associated. It is used to express the displacement of a rigid body, which may always be made to consist of a rotation about an axis combined with a translation parallel to that axis.
- (slang, derogatory) A prison guard.
- (snooker, billiards) Backspin.
- (slang, derogatory) An extortioner; a sharp bargainer; a skinflint.
- An amphipod crustacean.
- A simple machine, a helical inclined plane.
- A steam vessel propelled by a screw instead of wheels.
- The motion of screwing something; a turn or twist to one side.
- a simple machine of the inclined-plane type consisting of a spirally threaded cylindrical rod that engages with a similarly threaded hole
- someone who guards prisoners
- a propeller with several angled blades that rotates to push against water or air
- slang for sexual intercourse
- a fastener with a tapered threaded shank and a slotted head
verb
- (transitive) To tighten or secure with screws.
- (intransitive, colloquial) To blunder; to make a mistake.
- (transitive, colloquial) To make a mess of; to ruin.
- (transitive) To raise by turning a rotary handle.
- (transitive) To raise or summon up.
- (transitive) To twist into a contorted state.
- (transitive) To raise (rent, fees, etc.) to extortionate levels.
- make more intense
- make a mess of, destroy or ruin
- twist into a strained configuration
- screw or turn higher
Keine passenden Wörter gefunden. Versuchen Sie eine allgemeinere Beschreibung.